Export for GpsDrive

From GRASS-Wiki
Jump to navigation Jump to search

About this page

GpsDrive's wiki is down so in addition to information about how to use the d.out.gpsdrive module, this page will temporarily include some GDAL and datasource tips not directly related to GRASS. Once the page is fully (re)composed the GpsDrive specific content will move from here into a README file in the GpsDrive SVN. Sorry for any inconvenience, --HB

http://hamish.bowman.googlepages.com/ambrose_gpsdrive.png/ambrose_gpsdrive-large.png
GpsDrive with downloaded NOAA BSB Navigation Chart #12326,
"Approaches to NY Harbor", processed with gdalwarp and gdal_slice.sh


TODO

  • Incorporate info from the gpsdrive man page
  • Incorporate info from mailing list howto posts
  • Incorporate info from the d.out.gpsdrive help page

About GpsDrive

"GpsDrive is a car (bike, ship, plane) navigation system. GpsDrive displays your position provided from your GPS receiver on a zoomable map. The maps are autoselected for best resolution depending of your position and can be downloaded from the Internet. Speech output is supported if the "festival" software is running. All GPS receivers supported by gpsd should be usable.
GpsDrive is written in C with use of the GTK+ toolkit under the GPL license, and runs with Linux, Mac OSX, and FreeBSD."


Creating maps

GpsDrive tile format

File format

  • Common image format (Tiff, PNG, JPEG, ...) of size 1280x1024

Map registration

The map name, center coordinate, and map scaling parameter are saved in the map index file: ~/.gpsdrive/map_koord.txt

  • map_* maps
  • top_* maps
Important! The maps must be named "map_*" for UTM-like projections
(lat:lon = 1:cos(lat)) and "top_*" for lat/lon Plate carree projection
(lat:lon = 1:1). The prefix is given so that gpsdrive knows how to
scale the maps correctly. Alternatively the maps can be stored without
prefix in subdirectories of $HOME/.gpsdrive/ which end in "_map" or
"_top".


How to calculate the scaling factor
meters_per_pixel * 2817.947378

Perhaps 2817 was someone's monitor DPI converted to pixels/meter??

Using gpsfetchmap.pl

  • ...

Using gdal_slice.sh

  • Make sure that GDAL can read the format,
gdalinfo filename.ext

Check installed GDAL supported formats:

gdalinfo --formats

If the GDAL webpage says that the format is supported but you can't seem to access it, check that your copy of GDAL was built with support for it. You may have to rebuild GDAL yourself with the switch for that format enabled.

  • If GDAL can read the format, but it is not georeferenced, you will have to take care of that first. You should see some information about the coordinate system used and the lat/lon coordinates of the four corners of the map. See the #Georefencing section of this page.

Using GRASS GIS's d.out.gpsdrive


Data sources

Worldwide / Generic

Online MapServers

  • OpenStreeMap.org
  • gpsfetchmap.pl:
    • Google Maps
    • source2...
    • source3...
    • source4...


GIS data

Using GDAL and OGR
  • GDAL homepage
  • gdal_slice.sh - script to chop up a georeferenced raster image in any supported GDAL format to GpsDrive tiles

Navigation data

  • Generic S-57 ENC format

Other WMS servers

  • idea: build generic WMS support into gpsfetchmap.pl by hacking current code or using GDAL 1.5.0's WMS import tool.
Advantage: you can specify target tile size (1280x1024) directly in the request; simpler with fewer steps (ie doesn't require any heavy lifting with GRASS).
  • Use GRASS's r.in.wms module to load into GRASS, then run d.out.gpsdrive


Canada

Terrestrial data

  • Pat found good, free topo maps and nav charts (boat maps) for Canada.

Browse to find the data block from: http://toporama.cits.rncan.gc.ca/toporama_en.html

and then download the GeoTIFF for that block from: http://ftp2.cits.rncan.gc.ca/pub/canmatrix/50k_300dpi/031/e/

That may be in lat/lon with the NAD83 datum. For correctness's sake you could convert that to WGS84 first using gdalwarp. (GPSs typically provide fixes in WGS84) But as the difference between NAD83 and WGS84 are so minor (NAD83 uses the GRS80 ellipsoid) it is likely to be much less than the pixel width and not worth the trouble. (?)

Finally, create GpsDrive tiles with the gdal_slice.sh script.

Nautical data

  • ...


United States

Terrestrial data

  • Libremap has
    • 24k scale USGS DRG's - detailed topographic maps for all 50 states.
    • SVG boundary border files for all US states (including state, county, and town boundaries)
  • OpenStreetMap.org has imported all US roads into their database from the US's TIGER dataset.

Nautical data

  • NOAA ENC and BSB data
See mailing list posts