ADCIRC: Difference between revisions

From GRASS-Wiki
Jump to navigation Jump to search
Line 16: Line 16:
You can extract the tidal forcing factor amplitude and phase for boundary nodes needed in the fort.15 setup file from raster maps already loaded into GRASS. In the following example the [https://www.aviso.altimetry.fr/en/data/products/auxiliary-products/global-tide-fes/description-fes2004.html FES2004] dataset is used. (FES2002 for the K2 constituent as K2 is reputed to be broken in the 2004 edition)
You can extract the tidal forcing factor amplitude and phase for boundary nodes needed in the fort.15 setup file from raster maps already loaded into GRASS. In the following example the [https://www.aviso.altimetry.fr/en/data/products/auxiliary-products/global-tide-fes/description-fes2004.html FES2004] dataset is used. (FES2002 for the K2 constituent as K2 is reputed to be broken in the 2004 edition)


Import FES tidal database data:
<source lang="bash">
<source lang="bash">
# import and split phase into components
# import and split phase into components
r.in.gdal in=NETCDF:"tide.fes2004.nc":spectrum out=fes2004.spectrum -ol
r.in.gdal in=NETCDF:"tide.fes2004.nc":spectrum out=fes2004.spectrum -ol
MAPS=`g.mlist rast patt="fes2004*" | sort -n -k 3 -t .`
for MAP in $MAPS ; do
    echo "[$MAP]"
    r.region $MAP s=-90 w=-180
    eval `r.info -s $MAP`
    g.region rast=$MAP
    g.region n=n-$nsres s=s+$nsres w=w+$ewres
    r.mapcalc "$MAP.crop = $MAP"
    r.region $MAP.crop n=89.9375 s=-89.9375 w=0.0625 e=360.0625
    g.region rast=$MAP.crop
    g.remove $MAP
    g.rename $MAP.crop,$MAP.fixed
    echo
done


spectrum="2N2 K1 K2 M2 M4 Mf Mm Msqm Mtm N2 O1 P1 Q1 S2"
spectrum="2N2 K1 K2 M2 M4 Mf Mm Msqm Mtm N2 O1 P1 Q1 S2"
Line 36: Line 52:
EOF
EOF
done
done
</source>


###
Extract amplitude and phase at open boundary nodes:
<source lang="bash">
constits="M2  N2  S2  K1  O1  P1  K2  2N2  Q1  M4"
constits="M2  N2  S2  K1  O1  P1  K2  2N2  Q1  M4"



Revision as of 19:28, 26 July 2019

Interfacing with the ADCIRC coastal ocean model

Grid preparation

OceanMesh2D

OceanMesh2D is an open source (GPL3) generator of 2D triangular meshes suitable for use with ADCIRC. It likes to work in lat/lon coordinate system.

You can output your DEM as NetCDF format with r.out.gdal.

You can create a domain boundary polyline with r.contour. You can then output the domain boundary polyline either as Shapefiles with v.out.ogr, or as two column x,y ASCII data with the v.out.ascii.mat addon module for GRASS 6.

Boundary node attribute preparation

You can extract the tidal forcing factor amplitude and phase for boundary nodes needed in the fort.15 setup file from raster maps already loaded into GRASS. In the following example the FES2004 dataset is used. (FES2002 for the K2 constituent as K2 is reputed to be broken in the 2004 edition)

Import FES tidal database data:

# import and split phase into components
r.in.gdal in=NETCDF:"tide.fes2004.nc":spectrum out=fes2004.spectrum -ol

MAPS=`g.mlist rast patt="fes2004*" | sort -n -k 3 -t .`
for MAP in $MAPS ; do
    echo "[$MAP]"
    r.region $MAP s=-90 w=-180
    eval `r.info -s $MAP`
    g.region rast=$MAP
    g.region n=n-$nsres s=s+$nsres w=w+$ewres
    r.mapcalc "$MAP.crop = $MAP"
    r.region $MAP.crop n=89.9375 s=-89.9375 w=0.0625 e=360.0625
    g.region rast=$MAP.crop
    g.remove $MAP
    g.rename $MAP.crop,$MAP.fixed
    echo
done

spectrum="2N2 K1 K2 M2 M4 Mf Mm Msqm Mtm N2 O1 P1 Q1 S2"
for i in `seq 1 14` ; do
    constit=`echo "$spectrum" | tr ' ' '\n' | head -n $i | tail -n 1`
    g.rename fes2004.Ha.$i.fixed,fes2004.$constit.amplitude
    g.rename fes2004.Hg.$i.fixed,fes2004.$constit.phase
done

g.rename fes2004.K2.amplitude,fes2004.K2.amplitude.bad
g.rename fes2004.K2.phase,fes2004.K2.phase.bad

for map in `g.mlist rast patt="*.phase" | grep -v bad` ; do
    r.mapcalc << EOF
     $map.u = 1 * cos($map)
     $map.v = 1 * sin($map)
EOF
done

Extract amplitude and phase at open boundary nodes:

constits="M2  N2  S2  K1  O1  P1  K2  2N2  Q1  M4"

for const in $constits ; do
  MAP=fes2004.$const
  if [ $const = K2 ] ; then
    MAP=fes2002.K2
  fi
  echo "[$MAP]"

  v.what.rast vect=adcirc_grid_open_bdy_nodes \
    rast=$MAP.amplitude -pi --q | sort -n > $MAP.ampl.prn

  v.what.rast vect=adcirc_grid_open_bdy_nodes \
    rast=$MAP.phase -p --q | sort -n >  $MAP.phase_raw.prn
  v.what.rast vect=adcirc_grid_open_bdy_nodes \
    rast=$MAP.phase.u -pi --q | sort -n >  $MAP.phase.u.prn
  v.what.rast vect=adcirc_grid_open_bdy_nodes \
    rast=$MAP.phase.v -pi --q | sort -n >  $MAP.phase.v.prn

  echo "% $const: grid open boundary nodes" > $MAP.tidal.prn
  echo "% node ampl phase phase.u phase.v" >> $MAP.tidal.prn
  paste -d'|' $MAP.ampl.prn $MAP.phase_raw.prn \
      $MAP.phase.u.prn $MAP.phase.v.prn | \
    cut -f1,2,4,6,8 -d'|' | \
    tr '|' '\t' >> $MAP.tidal.prn
done

# check for nulls in the source data.
# Manually replace with values from nearby raster cells using d.what.rast
grep '*' *.tidal.prn

Then, in Matlab or Octave:

M2 = load('fes2004.M2.tidal.prn');
N2 = load('fes2004.N2.tidal.prn');
S2 = load('fes2004.S2.tidal.prn');
K1 = load('fes2004.K1.tidal.prn');
O1 = load('fes2004.O1.tidal.prn');
K2 = load('fes2002.K2.tidal.prn');
P1 = load('fes2004.P1.tidal.prn');
Q1 = load('fes2004.Q1.tidal.prn');

c2N2 = load('fes2004.2N2.tidal.prn');
M4 = load('fes2004.M4.tidal.prn');

% compare nearest neighbor phase angle vs. interpolated phase angle reconstructed from components
[M2(:,3)  cart2pol(M2(:,4), M2(:,5)) * 180/pi]

delta = M2(:,3) - (cart2pol(M2(:,4), M2(:,5)) * 180/pi);
[M2(:,1) delta]
plot(M2(:,1), delta), grid on
xlabel('boundary node')
ylabel('degrees')

[M2(:,1) M2(:,3) (cart2pol(M2(:,4), M2(:,5)) * 180/pi) delta]


%%%
constits={ 'M2' 'N2' 'S2' 'K1' 'O1' 'P1' 'K2' 'c2N2' 'Q1' 'M4' }

fid = fopen('grid_constits.prn', 'w')

for i = 1: length(constits)
  const = char(constits(i));
  eval(['data = ' const ';'])
  new_phase = cart2pol(data(:,4), data(:,5)) * 180/pi;
  for j = 1:length(new_phase)
    if (new_phase(j) < 0)
      new_phase(j) = new_phase(j) + 360;
    end
  end
  fprintf(fid, ' %s\n', const);
  for j = 1:length(new_phase)
    fprintf(fid, '   %8.6f  %9.5f\n', data(j,2), new_phase(j));
  end
end

fclose(fid)

% then manually fix c2N2 -> 2N2

Post processing output data

Importing the fort.14 mesh grid

The v.in.adcirc_grid addon module for GRASS 6 will import a 2.5D triangular mesh from the ADCIRC coastal ocean model into a 3D GRASS vector map.

  • v.in.adcirc_grid does not yet support loading in node type (boundary, etc.) as point attributes -- database tables can be a bit slow for maps with potentially millions of features. In the mean time here is a little shell script to extract the boundary nodes on the first open boundary into a separate vector points map:
 infile=fort.14
 inmap=mesh_grid_pts
 bdymap=mesh_bdy_pts
 
 v.in.adcirc_grid -p in=$infile out=$inmap
 num_pts=`grep ' = Number of nodes for open boundary' "$infile" | head -n 1 | awk '{print $1}'`
 cat_list=`grep -A"$num_pts" ' = Number of nodes for open boundary' "$infile" | \
    tail -n +2 | tr '\n' ',' | sed -e 's/ //g' -e 's/,$//'`
 v.extract in=$inmap out=$bdymap list="$cat_list"

Importing elevation or velocity reporting stations

With a little awk you can load in the elevation reporting stations for unit 61 with v.in.ascii.

example goes here

Visualizing sub-domains

If you wish to have a look at where the sub-domains of a parallel run are, you can use the following Bash script:

mkdir fort14s
for DIR in PE00?? ; do
   cp -a $DIR/fort.14 fort14s/${DIR}.14
done
 
cd fort14s
for file in *.14 ; do
   base=`echo "$file" | sed -e 's/PE00//' -e 's/\.14//'`
   echo -n "[$base]"
   v.in.adcirc_grid in="$file" out="submesh_$base" --quiet
   v.in.adcirc_grid -p in="$file" out="submesh_${base}_pts" --quiet
done

Here is a loop for displaying 80 sub-meshes, with random dark colors:

for PE in {00..79} ; do
  echo -n "[$PE]"
  R=`expr $RANDOM / 256`
  G=`expr $RANDOM / 256`
  B=`expr $RANDOM / 256`

  d.vect "submesh_$PE" color="$R:$G:$B"
done

d.vect US_medium_shoreline color=black width=2

d.vect station_map color=black fcolor=red size=8 icon=basic/circle

Importing unit 61, 62, 63, 64 results

- addme: bash code + r.in.xyz + r.surf.nnbathy

d.barb addon module for GRASS 6 for rendering u,v vector arrows