IKONOS: Difference between revisions

From GRASS-Wiki
Jump to navigation Jump to search
m (→‎Pre-Processing Overview: lower case \theta and link to {{wikipedia|Solar_zenith_angle}} -- link does not work?)
m (→‎Deriving Physical Quantities: some re-structuring)
Line 52: Line 52:


=== Deriving Physical Quantities ===
=== Deriving Physical Quantities ===
==== Spectral Radiance ====


Converting Digital Numbers to Radiance/Reflectance requires knowledge about the sensor's specific spectral band parameters. Those are, as extracted from the document ''IKONOS Planetary Reflectance and Mean Solar Exoatmospheric Irradiance'', by Martin Taylor (see references):
Converting Digital Numbers to Radiance/Reflectance requires knowledge about the sensor's specific spectral band parameters. Those are, as extracted from the document ''IKONOS Planetary Reflectance and Mean Solar Exoatmospheric Irradiance'', by Martin Taylor (see references):
Line 64: Line 62:
  NIR_CalCoef=843 ; NIR_Width=95.4 ; NIR_Esun=1156.9
  NIR_CalCoef=843 ; NIR_Width=95.4 ; NIR_Esun=1156.9
</source>
</source>
The following examples exemplify the conversion of raw Blue band digital numbers into Radiance and Reflectance.
==== Spectral Radiance ====


Converting a Blue Band (Digital Numbers) in to Spectral at-sensor Radiance in the ''correct'' units to be further used for the conversion in to unitless Reflectance:
Converting a Blue Band (Digital Numbers) in to Spectral at-sensor Radiance in the ''correct'' units to be further used for the conversion in to unitless Reflectance:

Revision as of 10:16, 27 July 2013

[This page is under construction]

IKONOS is a commercial earth observation satellite. Details about the sensor are provided at Digital Globe's IKONOS Data Sheet

Availability (Sample Data)

Pre-Processing Overview

Typically, multispectral satellite data are converted into physical quantities such as Radiance or Reflectance before they are subjected in multispectral analysis techniques (image interpretation, band arithmetic, vegetation indices, matrix transformations, etc.). The latter can be differentiated in Top of Atmosphere Reflectance (ToAR) which does not account for atmospheric effects (absorption or scattering) and in Top of Canopy Reflectance (ToCR) which introduces a "correction" for atmospheric effects.


In order to derive Reflectance values, likewise as with remotely sensed data acquired by other sensors, IKONOS raw image digital numbers (DNs) need to be converted to at-sensor spectral Radiance values. At-sensor spectral Radiance values are an important input for the equation to derive Reflectance values. Note, Spectal Radiance is the measure of the quantity of radiation that hits the sensor and typically expressed in , that is watts per unit source area, per unit solid angle, and per unit wavelength.


Converting DNs to at-sensor Radiance can be done by using the following equation:


Converting to Top of Atmosphere Reflectance, also referred to as Planetary Reflectance, can be done by using the following equation:

where:

  • - Unitless Planetary Reflectance
  • - mathematical constant (3.14159265358)
  • spectral Radiance at the sensor's aperture, from equation... ToADD
  • - Earth-Sun distance in astronomical units, interpolated values
  • - Mean solar exoatmospheric irradiance(s) (W/m2/μm), interpolated values
  • - Solar_zenith_angle from the image acquisition's metadata

Modules overview

ToAdd

File Formats & Metadata

ToAdd

Pre-Processing

ToAdd

Importing data

ToAdd

Deriving Physical Quantities

Converting Digital Numbers to Radiance/Reflectance requires knowledge about the sensor's specific spectral band parameters. Those are, as extracted from the document IKONOS Planetary Reflectance and Mean Solar Exoatmospheric Irradiance, by Martin Taylor (see references):

 Pan_CalCoef=161	;	Pan_Width=403		;	Pan_Esun=1375.8
 Blue_CalCoef=728	;	Blue_Width=71.3		;	Blue_Esun=1930.9
 Green_CalCoef=720	;	Green_Width=88.6	;	Green_Esun=1854.8
 Red_CalCoef=949	;	Red_Width=65.8		;	Red_Esun=1556.5
 NIR_CalCoef=843	;	NIR_Width=95.4		;	NIR_Esun=1156.9

The following examples exemplify the conversion of raw Blue band digital numbers into Radiance and Reflectance.


Spectral Radiance

Converting a Blue Band (Digital Numbers) in to Spectral at-sensor Radiance in the correct units to be further used for the conversion in to unitless Reflectance:

r.mapcalc "Blue_Radiance = ( (10000 * IKONOS_Blue_Band_DN) / (728 * 71.3) )"

Planetary Reflectance

The equation to derive Reflectance values incorporates in addition:

  • The mathematical constant Pi PI=3.14159265358.
  • The Earth-Sun distance in astronomical units which depends on the acquisition's day of year (DOY -- also referred to as Julian day, Ordinal_date) and can be retrieved from the following spreadsheet <http://landsathandbook.gsfc.nasa.gov/excel_docs/d.xls>.
  • The mean solar exoatmospheric irradiance in . See 3rd column of (interplated) values given above.
  • The cosine of the Solar Zenith Angle (SZA) at the time of the acquisition. The SZA can be calculated from its complementary Solar Elevation Angle (SEA) given in the image acquisition's metadata.


In the following example we accept as the acquisition's DOY=166 and SEA=52.78880. Hence, we get the Earth-Sun distance ESD=1.0157675 and SZA = 37.21120 deg.


Converting the in-Blue spectral band at-sensor Radiance in to Planerary Reflectance:

PI=3.14159265358; ESD=1.0157675; BAND_Esun=1930.9; SZA=37.21120
r.mapcalc "Blue_Reflectance = ( ${PI} * Blue_Radiance * ${ESD}^2 ) / ( ${BAND_Esun} * cos(${SZA}) )"

ToAdd

Atmospheric correction

See Atmospheric correction

Post-Processing

Having beforehand satellite image data expressed in physical quantities (radiance or reflectance) is preferred to follow-up with digital image analysis techniques.

Color composites

ToAdd

Pan Sharpening

ToAdd

Vegetation Indices

ToAdd

IKONOS Image classification

See Image classification

References / Sources


See also


ToAdd