Difference between revisions of "LANDSAT"

From GRASS-Wiki
Jump to: navigation, search
(Calculate Top-of-Atmosphere Reflectance and band-6 Temperature: "-t" switch does not exist anymore in i.landsat.toar)
m
 
(21 intermediate revisions by 5 users not shown)
Line 2: Line 2:
  
 
Landsat imagery can be obtained from [http://landsat.usgs.gov/ USGS' LANDSAT archive]:
 
Landsat imagery can be obtained from [http://landsat.usgs.gov/ USGS' LANDSAT archive]:
 +
 
* [http://glovis.usgs.gov USGS GloVis]
 
* [http://glovis.usgs.gov USGS GloVis]
 
* [http://earthexplorer.usgs.gov/ EarthExplorer]
 
* [http://earthexplorer.usgs.gov/ EarthExplorer]
 
* [http://earthexplorer.usgs.gov/bulk/help Bulk Download Orders] using the [http://earthexplorer.usgs.gov/bulk/ Bulk Download Application]
 
* [http://earthexplorer.usgs.gov/bulk/help Bulk Download Orders] using the [http://earthexplorer.usgs.gov/bulk/ Bulk Download Application]
 
* [http://landsatlook.usgs.gov/ LandsatLook Viewer]
 
* [http://landsatlook.usgs.gov/ LandsatLook Viewer]
 +
* [https://landsatonaws.com/ Landsat on Amazon Web Services]
 +
 +
See also
 +
 +
* the [[Global datasets]] wiki page
 +
* [http://landsat.usgs.gov/band_designations_landsat_satellites.php Landsat satellites band designations].
 +
 +
== Modules overview ==
 +
 +
GRASS GIS features a complete set of native modules and various add-ons for pre- and post-processing Landsat satellite imagery. The following lists offer an overview of related modules and add-ons.
 +
 +
=== Generic modules applicable to Landsat ===
 +
 +
* {{cmd|d.rgb}} → display 3-band data
 +
* {{cmd|r.composite}} → flatten 3-bands of data into a single image (lossy, maybe used in combination with {{cmd|i.colors.enhance}}
 +
* {{cmd|i.atcorr}} → correct top of atmosphere to surface reflectance - see also the [[Atmospheric correction]] wiki page
 +
* {{cmd|i.topo.corr}} → used to topographically correct reflectance from imagery files, e.g. obtained with {{cmd|i.landsat.toar}}, using a sun illumination terrain model
 +
* {{cmd|i.oif}} → calculate the 3 bands showing the greatest difference (for use as R,G,B bands)
 +
* {{AddonCmd|i.histo.match}} (addon) → histogram matching of two or more raster maps (in grass 7) ''Note, the module works with integer values and does not accept the "." character as part of the raster map's name!''
 +
 +
=== Landsat specific modules ===
 +
 +
* {{cmd|i.colors.enhance}} → auto-enhance colors
 +
* {{cmd|i.landsat.toar}} → convert DN to top of atmosphere radiance
 +
* {{cmd|i.landsat.acca}} → cloud cover assessment
 +
* {{cmd|i.tasscap}} → Performs Tasseled Cap (Kauth Thomas) transformation
  
See also the [[Global datasets]] wiki page
+
=== Landsat specific GRASS AddOns ===
  
== Pre-Processing Overview ==
+
* {{AddonCmd|i.landsat.trim|version=7}} → trims border fringes for each band separately or with the MASK where coverage exists for all bands
 +
* {{AddonCmd|i.landsat.dehaze|version=7}} → haze removal
 +
* {{AddonCmd|i.landsat8.qc|version=7}} → Reclass Landsat8 QA band according to acceptable pixel quality as defined by the user
 +
* {{AddonCmd|i.landsat8.swlst|version=7}} → Practical split-window algorithm estimating Land Surface Temperature from Landsat 8 OLI/TIRS imagery
 +
* {{AddonCmd|i.wi|version=7}} → Calculate different water indices
 +
 
 +
== Pre-Processing ==
 +
 
 +
=== Overview ===
  
 
Typically, pre-processing Landsat imagery comprises the following steps:
 
Typically, pre-processing Landsat imagery comprises the following steps:
Line 15: Line 50:
 
# '''import''' in the database → {{cmd|r.in.gdal}}
 
# '''import''' in the database → {{cmd|r.in.gdal}}
 
# geometrically & orthometrically correct imagery
 
# geometrically & orthometrically correct imagery
#* already done for L1T products, read more at [http://landsat.usgs.gov/products_productinformation.php USGS' Landsat Information Products] webpage
+
#* already done for L1T products, read more at [http://landsat.usgs.gov//Landsat_Processing_Details.php USGS' Landsat Information Products] webpage
# optionally, automatically '''cut-off border fringes''' → {{cmd|i.landsat.trim}}
+
# optionally, automatically '''cut-off border fringes''' → {{AddonCmd|i.landsat.trim|version=7}}
 
#* of course one can use the official WRS2 Path/Row vector tiles to manually trim border fringes
 
#* of course one can use the official WRS2 Path/Row vector tiles to manually trim border fringes
 
# optionally, '''denoise''' for obvious/intensive salt & pepper effects, stripes, etc.
 
# optionally, '''denoise''' for obvious/intensive salt & pepper effects, stripes, etc.
#* for example by applying Principal Components Analysis as a denoising technique → {{cmd|i.pca}}
+
#* for example by applying Principal Components Analysis as a denoising technique → {{cmd|i.pca}} ''<<< Re-order this step?''
 
# '''convert''' the '''Digital Numbers''' (DNs) to '''Top-of-Atmosphere Radiances/Reflectances''' (ToARs) → {{cmd|i.landsat.toar}}
 
# '''convert''' the '''Digital Numbers''' (DNs) to '''Top-of-Atmosphere Radiances/Reflectances''' (ToARs) → {{cmd|i.landsat.toar}}
 
# optionally, '''correct for atmospheric effects''' → {{cmd|i.atcorr}}
 
# optionally, '''correct for atmospheric effects''' → {{cmd|i.atcorr}}
Line 28: Line 63:
 
# '''topographically normalise''' imagery → {{cmd|i.topo.corr}}
 
# '''topographically normalise''' imagery → {{cmd|i.topo.corr}}
 
#* also known as topographic correction, that is, accounting for illumination differences due to the acquisition's geometry
 
#* also known as topographic correction, that is, accounting for illumination differences due to the acquisition's geometry
# '''radiometrically normalise''' → one approach via [https://svn.geotools.org/grass/grass-addons/grass7/imagery/i.histo.match/i.histo.match.html i.histo.match] (in '''grass 7''')
+
# '''radiometrically normalise''' → one approach via {{AddonCmd|i.histo.match}} (in '''grass 7''', addon), also known as relative radiometric normalisation -- one approach is the ''histogram matching'' technique of two or more raster maps
#* also known as relative radiometric normalisation -- one approach is the ''histogram matching'' technique of two or more raster maps
 
 
#* '''ToDo/More techniques?'''
 
#* '''ToDo/More techniques?'''
  
== Modules overview ==
+
See also
 +
* [http://courses.neteler.org/processing-landsat8-data-in-grass-gis-7/ Processing Landsat 8 data in GRASS GIS 7: Import and visualization]
 +
 
 +
=== Importing data ===
 +
 
 +
Importing Landsat spectral bands in GRASS GIS' data base can be done both from the Graphical User Interface or from the command line
 +
 
 +
 
 +
# Open GRASS GIS, select ''Location Wizard'' in order to create a new location from georeferenced file
 +
# Use the ''Import file tool'', or the {{cmd|r.in.gdal}} module, to import the GeoTIFF files into GRASS GIS.
  
=== Generic modules applicable to Landsat ===
+
See also [http://grasswiki.osgeo.org/wiki/LANDSAT#Automated_data_import Automated data import] below.
  
* {{cmd|d.rgb}} → display 3-band data
+
==== Notes ====
* {{cmd|r.composite}} → flatten 3-bands of data into a single image (lossy, maybe used in combination with {{cmd|i.landsat.rgb}})
 
* {{cmd|i.atcorr}} → correct top of atmosphere to surface reflectance - see also the [[Atmospheric correction]] wiki page
 
* {{cmd|i.topo.corr}} → used to topographically correct reflectance from imagery files, e.g. obtained with {{cmd|i.landsat.toar}}, using a sun illumination terrain model
 
* {{cmd|i.oif}} → calculate the 3 bands showing the greatest difference (for use as R,G,B bands)
 
* [https://svn.geotools.org/grass/grass-addons/grass7/imagery/i.histo.match/i.histo.match.html i.histo.match] → histogram matching of two or more raster maps (in grass 7) ''Note, the module works with integer values and does not accept the "." character as part of the raster map's name!''
 
  
=== Landsat specific modules ===
+
# Most Landsat scenes are delivered in ''north-is-up'' orientation, hence the import process is straightforward.
 +
# If you get <source lang="bash" enclose="none">ERROR: Input map is rotated - cannot import.</source>, the image must be first rotated externally, applying the rotation info stored in the metadata field of the raster image file. For example, the <code>gdalwarp</code> software can be used to transform the map to North-up (note, there are several <code>gdalwarp</code> parameters to select the resampling algorithm):
  
* {{cmd|i.landsat.rgb}} → auto-enhance colors
+
<ul>
* {{cmd|i.landsat.toar}} → convert DN to top of atmosphere radiance
+
<source lang="bash">
* {{cmd|i.landsat.acca}} → cloud cover assessment
+
  gdalwarp rotated.tif northup.tif
 +
</source>
 +
</ul>
  
=== Landsat specific GRASS AddOns ===
+
==== Hint: Minimal disk space copies ====
  
* {{AddonCmd|i.landsat.trim}} → trims border fringes for each band separately or with the MASK where coverage exists for all bands
+
Here's a little trick using {{cmd|r.reclass}} to rename maps (for example, from ''L71074092_09220040924_B'''10''''' to ''L71074092_09220040924_B'''1''''') without touching the data or wasting disk space:
* {{AddonCmd|i.landsat.dehaze}} (addon) → haze removal
 
  
== Pre-Processing ==
+
<source lang="bash">
 +
BASE=L71074092_09220040924
  
=== Importing data ===
+
for BAND in 10 20 30 40 50 61 70 80; do
 +
  BAND1st=`echo $BAND | sed -e 's/0$//'`
 +
  r.reclass in="${BASE}_B$BAND" out=$BASE.$BAND1st << EOF
 +
    * = *
 +
EOF
 +
done
 +
</source>
  
# Open GRASS GIS, select ''Location Wizard'' in order to create a new location from georeferenced file
 
# Use {{cmd|r.in.gdal}} or the ''Import file tool'' to import the GeoTIFF files into GRASS GIS. See also [http://grasswiki.osgeo.org/wiki/LANDSAT#Automated_data_import Automated data import] below.
 
## Most Landsat scenes are delivered in ''north-is-up'' orientation, hence import is straightforward
 
## If you get <source lang="bash" enclose="none">ERROR: Input map is rotated - cannot import.</source>, the image must be first externally rotated, applying the rotation info stored in the metadata field of the raster image file. For example, the <code>gdalwarp</code> software can be used to transform the map to North-up (note, there are several <code>gdalwarp</code> parameters to select the resampling algorithm): <source lang="bash">
 
  gdalwarp rotated.tif northup.tif</source>
 
  
  
Line 74: Line 116:
  
  
'''Note,''' the (newest) official naming pattern for Landsat scenes -- explained in [http://earthexplorer.usgs.gov/resources/helpdocs/dict/landsat_dictionary.html USGS' Landsat Data Dictionary] as the [http://earthexplorer.usgs.gov/resources/helpdocs/dict/landsat_dictionary.html#entity_id Landsat Scene Identifier] -- and all individual bands that compose a scene -- bands have a suffix which is like _B10, _B20, _B30, etc. -- differ from what some Landsat specific modules expect. For example, the modules {{cmd|i.landsat.toar}} and {{cmd|i.landsat.acca}} expect the bands to follow a naming pattern such as "scenename.1, .2, .3", etc.
+
'''Note,''' the (newest) official naming pattern for Landsat scenes -- explained in [https://lta.cr.usgs.gov/landsat_dictionary.html USGS' Landsat Data Dictionary] as the [https://lta.cr.usgs.gov/landsat_dictionary.html#entity_id Landsat Scene Identifier] -- and all individual bands that compose a scene -- bands have a suffix which is like _B10, _B20, _B30, etc. -- differ from what some Landsat specific modules expect. For example, the modules {{cmd|i.landsat.toar}} and {{cmd|i.landsat.acca}} expect the bands to follow a naming pattern such as "scenename.1, .2, .3", etc.
  
  
Line 100: Line 142:
 
             if len(line) == 0:
 
             if len(line) == 0:
 
                 continue
 
                 continue
             if 'ACQUISITION_DATE' in line:
+
             if any(x in line for x in ('DATE_ACQUIRED', 'ACQUISITION_DATE')):
 
                 result['date'] = line.strip().split('=')[1].strip()
 
                 result['date'] = line.strip().split('=')[1].strip()
 
     finally:
 
     finally:
Line 113: Line 155:
 
             continue
 
             continue
 
         ffile = os.path.join(mapset, file)
 
         ffile = os.path.join(mapset, file)
         name = os.path.splitext(file)[0].split('_')[-1]
+
         if ('VCID') in ffile:
         band = int(name[-1])
+
            name = "".join((os.path.splitext(file)[0].split('_'))[1::2])
 +
        else:
 +
            name = os.path.splitext(file)[0].split('_')[-1]
 +
        if len(name) == 3 and name[-1] == '0':
 +
            band = int(name[1:2])
 +
        elif len(name) == 3 and name[-1] != '0':
 +
            band = int(name[1:3])
 +
         else:
 +
            band = int(name[-1:])
 
         grass.message('Importing %s -> %s@%s...' % (file, name, mapset))
 
         grass.message('Importing %s -> %s@%s...' % (file, name, mapset))
 
         grass.run_command('g.mapset',
 
         grass.run_command('g.mapset',
Line 177: Line 227:
 
* <source lang="python" enclose="none">./import_landsat.py LM41890261983200FFF03</source> → the scrip will import only bands of the specified Landsat scene directory
 
* <source lang="python" enclose="none">./import_landsat.py LM41890261983200FFF03</source> → the scrip will import only bands of the specified Landsat scene directory
  
=== Hint: Minimal disk space copies ===
+
== Post-Processing ==
  
Here's a little trick using {{cmd|r.reclass}} to rename maps (for example, from ''L71074092_09220040924_B'''10''''' to ''L71074092_09220040924_B'''1''''') without touching the data or wasting disk space:
+
=== Natural color composites ===
  
<source lang="bash">
+
Creating natural (also known as true-) color composites, can be done by
BASE=L71074092_09220040924
 
  
for BAND in 10 20 30 40 50 61 70 80; do
+
a) using {{cmd|i.colors.enhance}} to automatically balance the colors for the Red, Green and Blue bands
  BAND1st=`echo $BAND | sed -e 's/0$//'`
 
  r.reclass in="${BASE}_B$BAND" out=$BASE.$BAND1st << EOF
 
    * = *
 
EOF
 
done
 
</source>
 
 
 
=== Natural color composites ===
 
  
Solution A) use {{cmd|i.landsat.rgb}}
+
or
  
Solution B) equalize colors on each R,G,B band with
+
b) equalizing the colors on each of the Red, Green and Blue bands
  
 +
<ul>
 
<source lang="bash">
 
<source lang="bash">
 
r.colors -e map=band1 color=grey
 
r.colors -e map=band1 color=grey
 
</source>
 
</source>
 +
</ul>
  
Composite: then run {{cmd|r.composite}}
+
'''Composites''' can then be produced with the {{cmd|r.composite}} module.
  
=== Reset color tables ===
+
'''Resetting the color tables''' of all bands back to normal greyscale can be done with a for loop:
  
 
<source lang="bash">
 
<source lang="bash">
Line 213: Line 256:
 
done
 
done
 
</source>
 
</source>
 +
 +
See also:
 +
* [http://courses.neteler.org/processing-landsat-8-data-in-grass-gis-7-rgb-composites-and-pan-sharpening/ Processing Landsat 8 data in GRASS GIS 7: RGB composites and pan sharpening]
  
 
=== Create a MASK to only show data where coverage exists for all bands ===
 
=== Create a MASK to only show data where coverage exists for all bands ===
Line 227: Line 273:
 
=== Calculate Top-of-Atmosphere Reflectance and band-6 Temperature ===
 
=== Calculate Top-of-Atmosphere Reflectance and band-6 Temperature ===
  
Calculate ''Top-of-Atmosphere'' reflectance and band-6 temperature using the {{cmd|i.landsat.toar}} module. For details, refer to USGS' [http://landsat.usgs.gov/Landsat_Metadata_Changes.php Landsat Filename and Metadata Changes] dedicated page.
+
Calculate ''Top-of-Atmosphere'' reflectance and band-6 temperature using the {{cmd|i.landsat.toar}} module. For details, refer to USGS' [http://landsat.usgs.gov/Landsat_Metadata_Changes.php Landsat Filename and Metadata Changes] dedicated page. For Landsat 8, see also [http://landsat.usgs.gov/about_LU_Vol_7_Issue_4.php#3a here].
 
<source lang="bash">
 
<source lang="bash">
  i.landsat.toar input_prefix=$BASE output_prefix=${BASE}_toar sensor=tm7 metfile=${BASE}_MTL.txt -t
+
  i.landsat.toar input_prefix=$BASE output_prefix=${BASE}_toar metfile=${BASE}_MTL.txt
 
</source>
 
</source>
  
Line 241: Line 287:
 
=== Haze removal ===
 
=== Haze removal ===
  
Simple haze removal can be done with {{AddonCmd|i.landsat.dehaze}}. i.landsat.dehaze applies a bandwise haze correction using tasscap4 (haze) and linear regression.
+
Simple haze removal can be done with {{AddonCmd|i.landsat.dehaze|version=7}}. This addons applies a bandwise haze correction using tasscap4 (haze) and linear regression.
  
 +
During the 2000s, prior acquired Landsat data were reprocessed to LPGS (Level 1 Product Generation System). Seems that with this level of processing, haze effect in raw data was removed and now is sufficient to apply {{Cmd|i.colors.enhance}} to obtain a good image with high contrast.
  
 
=== Atmospheric correction ===
 
=== Atmospheric correction ===
Line 250: Line 297:
 
=== Cloud identification ===
 
=== Cloud identification ===
  
Identify clouds in the image with {{cmd|i.landsat.acca|version=65}}:
+
Identify clouds in the image with {{cmd|i.landsat.acca}}:
 
<source lang="bash">i.landsat.acca -f input_prefix=226_62_toar. output=226_62.acca_cloudmask</source>
 
<source lang="bash">i.landsat.acca -f input_prefix=226_62_toar. output=226_62.acca_cloudmask</source>
  
Line 396: Line 443:
  
 
See [[Image classification]]
 
See [[Image classification]]
 +
 +
== Time series analysis ==
 +
 +
See [[Time series]]
 +
 +
== Sources ==
 +
 +
* [http://landsat.usgs.gov/tools_access_all_faqs.php Frequently Asked Questions about the Landsat Missions]
 +
* [https://landsat8portal.eo.esa.int/portal/ European LANDSAT 8 data in near-realtime]
 +
* [http://courses.neteler.org/processing-landsat8-data-in-grass-gis-7/ Processing Landsat 8 data in GRASS GIS 7: Import and visualization]
 +
* [http://courses.neteler.org/processing-landsat-8-data-in-grass-gis-7-rgb-composites-and-pan-sharpening/ Processing Landsat 8 data in GRASS GIS 7: RGB composites and pan sharpening]
  
 
[[Category: Documentation]]
 
[[Category: Documentation]]
Line 405: Line 463:
 
[[Category: Radiance]]
 
[[Category: Radiance]]
 
[[Category: Reflectance]]
 
[[Category: Reflectance]]
 +
[[Category: Geodata]]

Latest revision as of 02:31, 4 December 2018

Data Availability

Landsat imagery can be obtained from USGS' LANDSAT archive:

See also

Modules overview

GRASS GIS features a complete set of native modules and various add-ons for pre- and post-processing Landsat satellite imagery. The following lists offer an overview of related modules and add-ons.

Generic modules applicable to Landsat

  • d.rgb → display 3-band data
  • r.composite → flatten 3-bands of data into a single image (lossy, maybe used in combination with i.colors.enhance
  • i.atcorr → correct top of atmosphere to surface reflectance - see also the Atmospheric correction wiki page
  • i.topo.corr → used to topographically correct reflectance from imagery files, e.g. obtained with i.landsat.toar, using a sun illumination terrain model
  • i.oif → calculate the 3 bands showing the greatest difference (for use as R,G,B bands)
  • i.histo.match (addon) → histogram matching of two or more raster maps (in grass 7) Note, the module works with integer values and does not accept the "." character as part of the raster map's name!

Landsat specific modules

Landsat specific GRASS AddOns

  • i.landsat.trim → trims border fringes for each band separately or with the MASK where coverage exists for all bands
  • i.landsat.dehaze → haze removal
  • i.landsat8.qc → Reclass Landsat8 QA band according to acceptable pixel quality as defined by the user
  • i.landsat8.swlst → Practical split-window algorithm estimating Land Surface Temperature from Landsat 8 OLI/TIRS imagery
  • i.wi → Calculate different water indices

Pre-Processing

Overview

Typically, pre-processing Landsat imagery comprises the following steps:

  1. import in the database → r.in.gdal
  2. geometrically & orthometrically correct imagery
  3. optionally, automatically cut-off border fringesi.landsat.trim
    • of course one can use the official WRS2 Path/Row vector tiles to manually trim border fringes
  4. optionally, denoise for obvious/intensive salt & pepper effects, stripes, etc.
    • for example by applying Principal Components Analysis as a denoising technique → i.pca <<< Re-order this step?
  5. convert the Digital Numbers (DNs) to Top-of-Atmosphere Radiances/Reflectances (ToARs) → i.landsat.toar
  6. optionally, correct for atmospheric effectsi.atcorr
    • that is, accounting for distorting atmospheric effects and estimating actual reflectances as they would have been measured on the ground
    • also described as conversion to Top-of-Canopy Reflectances (ToCRs)
  7. assessing cloud coveri.landsat.acca
    • optionally, detect and remove clouds shadows as well
  8. topographically normalise imagery → i.topo.corr
    • also known as topographic correction, that is, accounting for illumination differences due to the acquisition's geometry
  9. radiometrically normalise → one approach via i.histo.match (in grass 7, addon), also known as relative radiometric normalisation -- one approach is the histogram matching technique of two or more raster maps
    • ToDo/More techniques?

See also

Importing data

Importing Landsat spectral bands in GRASS GIS' data base can be done both from the Graphical User Interface or from the command line


  1. Open GRASS GIS, select Location Wizard in order to create a new location from georeferenced file
  2. Use the Import file tool, or the r.in.gdal module, to import the GeoTIFF files into GRASS GIS.

See also Automated data import below.

Notes

  1. Most Landsat scenes are delivered in north-is-up orientation, hence the import process is straightforward.
  2. If you get ERROR: Input map is rotated - cannot import., the image must be first rotated externally, applying the rotation info stored in the metadata field of the raster image file. For example, the gdalwarp software can be used to transform the map to North-up (note, there are several gdalwarp parameters to select the resampling algorithm):
      gdalwarp rotated.tif northup.tif
    

Hint: Minimal disk space copies

Here's a little trick using r.reclass to rename maps (for example, from L71074092_09220040924_B10 to L71074092_09220040924_B1) without touching the data or wasting disk space:

BASE=L71074092_09220040924

for BAND in 10 20 30 40 50 61 70 80; do
  BAND1st=`echo $BAND | sed -e 's/0$//'`
  r.reclass in="${BASE}_B$BAND" out=$BASE.$BAND1st << EOF
    * = *
EOF
done


Automated data import

The following Python script imports Landsat imagery into GRASS' data base. Specifically, the script

  • creates an independent Mapset for each Landsat scene
  • imports and renames bands of a scene as B<id>, e.g. B10, B20, ..., B80.
  • additionaly sets up the timestamp based on MTL metadata file


Note, the (newest) official naming pattern for Landsat scenes -- explained in USGS' Landsat Data Dictionary as the Landsat Scene Identifier -- and all individual bands that compose a scene -- bands have a suffix which is like _B10, _B20, _B30, etc. -- differ from what some Landsat specific modules expect. For example, the modules i.landsat.toar and i.landsat.acca expect the bands to follow a naming pattern such as "scenename.1, .2, .3", etc.


To use the script save it as import_landsat.py file and make sure it is granted the execution permission.

#!/usr/bin/python
 
import os
import sys
import glob
import grass.script as grass
 
def get_timestamp(mapset):
    try:
        metafile = glob.glob(mapset + '/*MTL.txt')[0]
    except IndexError:
        return
 
    result = dict()
    try:
        fd = open(metafile)
        for line in fd.readlines():
            line = line.rstrip('\n')
            if len(line) == 0:
                continue
            if any(x in line for x in ('DATE_ACQUIRED', 'ACQUISITION_DATE')):
                result['date'] = line.strip().split('=')[1].strip()
    finally:
        fd.close()
 
    return result
 
def import_tifs(mapset):
    meta = get_timestamp(mapset)
    for file in os.listdir(mapset):
        if os.path.splitext(file)[-1] != '.TIF':
            continue
        ffile = os.path.join(mapset, file)
        if ('VCID') in ffile:
            name = "".join((os.path.splitext(file)[0].split('_'))[1::2])
        else:
            name = os.path.splitext(file)[0].split('_')[-1]
        if len(name) == 3 and name[-1] == '0':
            band = int(name[1:2])
        elif len(name) == 3 and name[-1] != '0':
            band = int(name[1:3])
        else:
            band = int(name[-1:])
        grass.message('Importing %s -> %s@%s...' % (file, name, mapset))
        grass.run_command('g.mapset',
                          flags = 'c',
                          mapset = mapset,
                          quiet = True,
                          stderr = open(os.devnull, 'w'))
        grass.run_command('r.in.gdal',
                          input = ffile,
                          output = name,
                          quiet = True,
                          overwrite = True,
                          title = 'band %d' % band)
        if meta:
            year, month, day = meta['date'].split('-')
            if month == '01':
                month = 'jan'
            elif month == '02':
                month = 'feb'
            elif month == '03':
                month = 'mar'
            elif month == '04':
                month = 'apr'
            elif month == '05':
                month = 'may'
            elif month == '06':
                month = 'jun'
            elif month == '07':
                month = 'jul'
            elif month == '08':
                month = 'aug'
            elif month == '09':
                month = 'sep'
            elif month == '10':
                month = 'oct'
            elif month == '11':
                month = 'nov'
            elif month == '12':
                month = 'dec'
 
            grass.run_command('r.timestamp',
                              map = name,
                              date = ' '.join((day, month, year)))
 
def main():
    if len(sys.argv) == 1:
        for directory in filter(os.path.isdir, os.listdir(os.getcwd())):
            import_tifs(directory)
    else:
        import_tifs(sys.argv[1])
 
if __name__ == "__main__":
    main()


Example of usage

After having collected the Landsat scenes of interest in one directory, the script can be used as follows:

  • ./import_landsat.py → the script will walk through a pool directory that contains unique Landsat scene directories (e.g. three directories named after the official naming pattern: LT51800342011158MOR00 LT51810352009079MTI00 LT51820352009326MTI00) and import all bands of each individual scene in their own Mapset
  • ./import_landsat.py LM41890261983200FFF03 → the scrip will import only bands of the specified Landsat scene directory

Post-Processing

Natural color composites

Creating natural (also known as true-) color composites, can be done by

a) using i.colors.enhance to automatically balance the colors for the Red, Green and Blue bands

or

b) equalizing the colors on each of the Red, Green and Blue bands

    r.colors -e map=band1 color=grey
    

Composites can then be produced with the r.composite module.

Resetting the color tables of all bands back to normal greyscale can be done with a for loop:

BASE=L71074092_09220040924

for map in `g.mlist pat="$BASE.[0-8]*"` ; do
  r.colors $map color=grey255
done

See also:

Create a MASK to only show data where coverage exists for all bands

BASE=L71074092_09220040924

g.region rast=$BASE.1
r.series in=`g.mlist pat="$BASE.[0-8]*" sep=,` -n out=$BASE.thresh method=threshold thresh=1
r.mapcalc "$BASE.mask = if(isnull($BASE.thresh))"
g.remove $BASE.thresh

Calculate Top-of-Atmosphere Reflectance and band-6 Temperature

Calculate Top-of-Atmosphere reflectance and band-6 temperature using the i.landsat.toar module. For details, refer to USGS' Landsat Filename and Metadata Changes dedicated page. For Landsat 8, see also here.

 i.landsat.toar input_prefix=$BASE output_prefix=${BASE}_toar metfile=${BASE}_MTL.txt

Note, the resulting temperature map is in Kelvin:

 # convert to degree Celsius
 r.mapcalc "$BASE.temp_celsius = ${BASE}_toar.6 - 273.15"
 r.info -r $BASE.temp_celsius

Haze removal

Simple haze removal can be done with i.landsat.dehaze. This addons applies a bandwise haze correction using tasscap4 (haze) and linear regression.

During the 2000s, prior acquired Landsat data were reprocessed to LPGS (Level 1 Product Generation System). Seems that with this level of processing, haze effect in raw data was removed and now is sufficient to apply i.colors.enhance to obtain a good image with high contrast.

Atmospheric correction

See Atmospheric correction

Cloud identification

Identify clouds in the image with i.landsat.acca:

i.landsat.acca -f input_prefix=226_62_toar. output=226_62.acca_cloudmask

Mask out the clouds:

r.mapcalc "MASK = if(isnull($BASE.acca_cloudmask))"

Download sample data

Preprocessed Landsat-7 data for North Carolina

The North Carolina 2008 sample dataset comes with 3 different Landsat scenes:

(Wake County -- path: 16 row: 35 for various dates)

The above import efforts are not needed since the data are already in a GRASS location.

Landsat-5: Oct 14, 1987

Glovis download
LT50160351987287XXX08
http://edcsns17.cr.usgs.gov/cgi-bin/EarthExplorer/run-phtml/results/download.phtml?node=GV&ordered=LT50160351987287XXX08&dataset_name=LANDSAT_TM


Provided metadata:

IMAGE_ID=P016R35_5T871014
PATH=16
ROW=35
DATE=10/14/87
PLATFORM=LANDSAT5

Landsat-7: Mar 31, 2000

Glovis download
LE70160352000091EDC00
http://edcsns17.cr.usgs.gov/cgi-bin/EarthExplorer/run-phtml/results/download.phtml?node=GV&ordered=LE70160352000091EDC00&dataset_name=LANDSAT_ETM

Values in the metadata below indicate that the version provided with the NC 2008 dataset's production date was after July 1, 2000, and that the channel gains were HHHLHLHHL.

Convert DNs to radiance/temperatures:
 GRASS> i.landsat.toar -v band=lsat7_2000 sensor=7 date=2000-03-31 \
    product_date=2000-07-02 solar_elevation=51.5246529 gain=HHHLHLHHL

Provided metadata:

SPACECRAFT_ID=Landsat7
SENSOR_ID=ETM+
ACQUISITION_DATE=2000-03-31
WRS_PATH=16
CPF_FILE_NAME=L7CPF20000101_20000331_12
SUN_AZIMUTH=139.6033279
SUN_ELEVATION=51.5246529
LMAX_BAND1=191.600
LMIN_BAND1=-6.200
LMAX_BAND2=196.500
LMIN_BAND2=-6.400
LMAX_BAND3=152.900
LMIN_BAND3=-5.000
LMAX_BAND4=241.100
LMIN_BAND4=-5.100
LMAX_BAND5=31.060
LMIN_BAND5=-1.000
LMAX_BAND61=17.040
LMIN_BAND61=0.000
LMAX_BAND62=12.650
LMIN_BAND62=3.200
LMAX_BAND7=10.800
LMIN_BAND7=-0.350
LMAX_BAND8=243.100
LMIN_BAND8=-4.700
QCALMAX_BAND1=255.0
QCALMIN_BAND1=1.0
QCALMAX_BAND2=255.0
QCALMIN_BAND2=1.0
QCALMAX_BAND3=255.0
QCALMIN_BAND3=1.0
QCALMAX_BAND4=255.0
QCALMIN_BAND4=1.0
QCALMAX_BAND5=255.0
QCALMIN_BAND5=1.0
QCALMAX_BAND61=255.0
QCALMIN_BAND61=1.0
QCALMAX_BAND62=255.0
QCALMIN_BAND62=1.0
QCALMAX_BAND7=255.0
QCALMIN_BAND7=1.0
QCALMAX_BAND8=255.0
QCALMIN_BAND8=1.0

Landsat-7: May 24, 2002

Glovis download
LE70160352002144EDC00
http://edcsns17.cr.usgs.gov/cgi-bin/EarthExplorer/run-phtml/results/download.phtml?node=GV&ordered=LE70160352002144EDC00&dataset_name=LANDSAT_ETM


Provided metadata: (`p016r035_7x20020524.met`)

SPACECRAFT_ID=Landsat7
SENSOR_ID=ETM+
ACQUISITION_DATE=2002-05-24
WRS_PATH=016
WRS_ROW=035
SUN_AZIMUTH=120.8810347
SUN_ELEVATION=64.7730999
QA_PERCENT_MISSING_DATA=0
CLOUD_COVER=0
CPF_FILE_NAME=L7CPF20020401_20020630_03
LMAX_BAND1=191.600
LMIN_BAND1=-6.200
LMAX_BAND2=196.500
LMIN_BAND2=-6.400
LMAX_BAND3=152.900
LMIN_BAND3=-5.000
LMAX_BAND4=241.100
LMIN_BAND4=-5.100
LMAX_BAND5=31.060
LMIN_BAND5=-1.000
LMAX_BAND61=17.040
LMIN_BAND61=0.000
LMAX_BAND62=12.650
LMIN_BAND62=3.200
LMAX_BAND7=10.800
LMIN_BAND7=-0.350
LMAX_BAND8=243.100
LMIN_BAND8=-4.700
QCALMAX_BAND1=255.0
QCALMIN_BAND1=1.0
QCALMAX_BAND2=255.0
QCALMIN_BAND2=1.0
QCALMAX_BAND3=255.0
QCALMIN_BAND3=1.0
QCALMAX_BAND4=255.0
QCALMIN_BAND4=1.0
QCALMAX_BAND5=255.0
QCALMIN_BAND5=1.0
QCALMAX_BAND61=255.0
QCALMIN_BAND61=1.0
QCALMAX_BAND62=255.0
QCALMIN_BAND62=1.0
QCALMAX_BAND7=255.0
QCALMIN_BAND7=1.0
QCALMAX_BAND8=255.0
QCALMIN_BAND8=1.0

LANDSAT Image classification

See Image classification

Time series analysis

See Time series

Sources