WinGRASS 6 Current Status: Difference between revisions

From GRASS-Wiki
Jump to navigation Jump to search
(cleanup)
 
(5 intermediate revisions by the same user not shown)
Line 1: Line 1:
__TOC__
__TOC__


This page describes the current status of winGRASS development as of mid-2013
This page describes the current status of winGRASS 6 development as of mid-2013


* '''[http://grass.osgeo.org/download/software/ms-windows/ Lastest downloads]'''
* '''[http://grass.osgeo.org/download/software/ms-windows/ Lastest binary downloads]'''


* ''Older precompiled winGRASS/[[Cygwin]] packages are available for [http://grass.osgeo.org/grass64/binary/mswindows/cygwin/ GRASS 6.4], ''
* ''Older precompiled winGRASS/[[Cygwin]] packages are available for [http://grass.osgeo.org/grass64/binary/mswindows/cygwin/ GRASS 6.4], ''
<!-- dead url? * ''Older native winGRASS packages [http://geog-pc40.ulb.ac.be/grass/wingrass/ GRASS 6.3],'' -->


== Current status - Summary ==
== Current status - Summary ==


The native windows port of GRASS is slowly coming to a stage where it can be considered mature beta status. All main functions seem to work, but much more testing is needed. The port is of the current SVN release branch for GRASS 6.4. The only prior native port of an earlier version is 6.3.0.
The native windows port of GRASS is slowly coming to a stage where it can be considered mature beta status. All main functions seem to work, but much more testing is needed. The port is of the current SVN release branch 6 for GRASS 6.4. The only prior native port of an earlier version is 6.3.0.


The general idea is to reach a point where GRASS runs in MS-Windows without any kind of UNIX emulation. Currently this is possible but limits the use to compiled modules, as scripts are all of UNIX-shell type and cannot run within a Windows cmd.exe environment without a series of UNIX tools such as a shell, awk, sed, etc. So in order to run such scripts a collection of UNIX-like tools needs to be installed, such as Msys or Gnuwin32+Shell.
The general idea is to reach a point where GRASS runs in MS-Windows without any kind of UNIX emulation. Currently this is possible but limits the use to compiled modules, as scripts are all of UNIX-shell type and cannot run within a Windows cmd.exe environment without a series of UNIX tools such as a shell, awk, sed, etc. So in order to run such scripts a collection of UNIX-like tools needs to be installed, such as Msys or Gnuwin32+Shell.
Line 20: Line 17:
== Installing binary snapshots ==
== Installing binary snapshots ==


Regular binary snapshots for windows are available from the main GRASS [http://grass.osgeo.org/download/software/ms-windows/ download page].
Regular binary snapshots for Windows are available from the main GRASS [http://grass.osgeo.org/download/software/ms-windows/ download page].


== Compiling by yourself ==
== Compiling by yourself ==
Line 54: Line 51:
: Workaround: if this is causing problems for you the quick solution is to rename the GIS data directory and replace all spaces with underscores (_).
: Workaround: if this is causing problems for you the quick solution is to rename the GIS data directory and replace all spaces with underscores (_).


* The '''{{cmd|r.li}}''' suite and '''{{cmd|d.mon}}''' Xmonitors won't work. These use UNIX pipes and won't work on Windows without a lot of work.
* The '''{{cmd|d.mon}}''' X monitors won't work. These use UNIX pipes and won't work on Windows without a lot of work.
: Solution: use {{cmd|d.mon|version=70}} wx0 or the wxGUI ([http://wingrass.fsv.cvut.cz/grass70/ winGRASS 7])


=== Won't fix (at least not immediately) ===
=== Won't fix (at least not immediately) ===
Line 60: Line 58:
Issues listed here are rather impossible to fix due to the different nature of native Windows. Or, lend us a hand and let's try harder!
Issues listed here are rather impossible to fix due to the different nature of native Windows. Or, lend us a hand and let's try harder!


* No monitors
* No X monitors in winGRASS 6:


This means that you cannot launch any monitor launched with d.mon (x0, PNG, PS, etc). The only way you can render is directly to a file. But you cannot directly display to screen from the command line. This will be solved in GRASS 7 with a new rendering system and possibly via the new wxgrass GUI. So no work will probably be put into this until then.  
This means that you cannot launch any monitor launched with d.mon (x0, PNG, PS, etc). The only way you can render is directly to a file. But you cannot directly display to screen from the command line. This will be solved in GRASS 7 with a new rendering system and possibly via the new wxgrass GUI. So no work will probably be put into this until then.  
Line 66: Line 64:
The absence of monitors also makes impossible the use of interactive modules based on these monitors, such as:
The absence of monitors also makes impossible the use of interactive modules based on these monitors, such as:


** i.class. However, it has been integrated into GRASS 7 wxGUI in January 2012 ([http://wingrass.fsv.cvut.cz/grass70/ winGRASS 7])
** i.class. However, it has been integrated into GRASS 7's wxGUI as {{cmd|g.gui.iclass|version=70}} ([http://wingrass.fsv.cvut.cz/grass70/ winGRASS 7])
** i.ortho.photo/photo.2image
** i.ortho.photo/photo.2image
** i.ortho.photo/photo.2target
** i.ortho.photo/photo.2target
Line 72: Line 70:
** i.vpoints
** i.vpoints


i.points and i.vpoints have already been replaced by the gis.m georectifier module (File -> Georectify). In replacement of i.class you can digitize training areas with v.digit. This will not however, give you all the information i.class provides, such as the histogram of the region, the statistics and the display of matches. These modules will have to be rewritten to clearly separate display and backend parts, so that the backend can be run on the command line or from any GUI frontend. '''Volunteers needed.'''
i.points and i.vpoints have already been replaced by the {{cmd|g.gui.gcp|version=70}} georectifier module (File -> Georectify).
'''Volunteers needed''' for i.ortho.* GUI.


Another module affected is d.vect.thematic which uses monitors. This will hopefully be replaced by a C-version in a not too far future.
Another module affected is d.vect.thematic which uses monitors. This will hopefully be replaced by a C-version in a not too far future.
Line 80: Line 79:
All current GRASS 6.4 scripts are written in shell language. This means they need a shell, and several related tools (awk, sed, etc), to function. The actual WinGrass 6.4-installer includes Msys, so all shell-scripts should work.
All current GRASS 6.4 scripts are written in shell language. This means they need a shell, and several related tools (awk, sed, etc), to function. The actual WinGrass 6.4-installer includes Msys, so all shell-scripts should work.


In 7.0, these scripts have been rewritten in Python, thus totally eliminating the need for any shell.
In 7.0, these scripts have been rewritten in Python, thus totally eliminating the need for any shell, see [[WinGRASS 7 Current Status]] and [https://trac.osgeo.org/grass/wiki/Grass7/NewFeatures GRASS GIS 7 - New Features].


=== Missing modules ===
=== Missing modules ===


* The r.li landscape structure analysis suite: not ported yet
* The r.le landscape modelling suite:
* The r.le landscape modelling suite:
** r.le.setup, r.le.trace: not ported yet
** r.le.setup, r.le.trace: not ported yet
: Solution: use r.li.*
** r.le.pixel, r.le.patch: available
** r.le.pixel, r.le.patch: available
* Some GUI helper scripts such as g.change.gui.py and v.type.py
* Some GUI helper scripts such as g.change.gui.py and v.type.py
Line 92: Line 91:
** v.type_wrapper.py crashes
** v.type_wrapper.py crashes
* The wxnviz 3D visualization module for the new wxGUI. Use NVIZ available from the old Tcl/Tk GIS.m GUI instead.
* The wxnviz 3D visualization module for the new wxGUI. Use NVIZ available from the old Tcl/Tk GIS.m GUI instead.
: use [http://wingrass.fsv.cvut.cz/grass70/ winGRASS 7]
* v.out.gpsbabel fails to start m.proj although present
* v.out.gpsbabel fails to start m.proj although present
* GRASS GIS Cartographic Composer &rarr; Preview fails
: Use v.out.gps
* i.ortho.photo => greyed out, requires xterm unavailable in MS-Windows
* i.ortho.photo => greyed out, requires xterm unavailable in MS-Windows
: Work in progress in winGRASS7
* i.class => greyed out, requires xterm unavailable in MS-Windows
* i.class => greyed out, requires xterm unavailable in MS-Windows
: integrated into GRASS 7's wxGUI as {{cmd|g.gui.iclass|version=70}} ([http://wingrass.fsv.cvut.cz/grass70/ winGRASS 7])
* r.digit => greyed out, requires xterm unavailable in MS-Windows
* r.digit => greyed out, requires xterm unavailable in MS-Windows
* v.krige.py => greyed out


=== Platform specific issues ===
=== Platform specific issues ===
Line 121: Line 122:


* <font size="+1">Missing MSVCR71.dll or MSVCP100.dll library causes GRASS to <font color="#aa2200">exit immediately upon startup</font></font>.
* <font size="+1">Missing MSVCR71.dll or MSVCP100.dll library causes GRASS to <font color="#aa2200">exit immediately upon startup</font></font>.
: Try installing Microsoft's .net frameworks as described above in the XP section to get the various Visual C++ Redistributables. [http://msdn.microsoft.com/en-us/netframework/aa569264 You can download them here] and for [http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=5555 MSVCP100.dll here]. (Install redistributable first, main package second, and service pack third)
: For the solution, see [[WinGRASS errors]]
: If that doesn't solve it, try these instructions found in a web search: http://i.justrealized.com/2009/how-to-fix-missing-msvcr71dll-problem-in-windows/
: Unfortunately we can't legally distribute Microsoft's library with GRASS directly.


=== ToDo ===
=== ToDo ===
Line 165: Line 164:
==== Vector modules ====
==== Vector modules ====


* v.in.ascii crashes on files with irregular line length (see [http://lists.osgeo.org/pipermail/grass-dev/2008-February/035268.html this thread])
* v.in.ascii crashes on files with irregular line length (see [http://lists.osgeo.org/pipermail/grass-dev/2008-February/035268.html this thread]) - still true, 2014?


==== Raster modules ====
==== Raster modules ====
Line 171: Line 170:
* The [[wxGUI]] has an issue when trying to run {{cmd|r.mapcalc}} with the <tt>||</tt> "or" operator from the wxGUI built-in command entry box on the command console tab of the Layer Manager. You can work around this by running r.mapcalc using the Map Calculator GUI, or from a real command line (in that case remember to "quote" the expression).
* The [[wxGUI]] has an issue when trying to run {{cmd|r.mapcalc}} with the <tt>||</tt> "or" operator from the wxGUI built-in command entry box on the command console tab of the Layer Manager. You can work around this by running r.mapcalc using the Map Calculator GUI, or from a real command line (in that case remember to "quote" the expression).


* The same wxGUI built-in command entry box on the command colsole tab requires file names with paths to be fully "quoted", e.g. ''input="C:\data\positions.csv"'', or else the "\" characters are lost.
* The same wxGUI built-in command entry box on the command console tab requires file names with paths to be fully "quoted", e.g. ''input="C:\data\positions.csv"'', or else the "\" characters are lost.
 
==== Other modules ====
* r.li moduels do not compile (they require UNIX sockets, much the same situation as the display monitors)
: Use the older r.le modules instead.


==== GRASS Addons ====
==== GRASS 6 Addons ====
* Not all the GRASS [[Addons]] are available from the [[wxGUI]] extension manager. Problems still exist with running Python scripts. The command line version of {{cmd|g.extension}} requires the full [[osgeo4w]] build environment, which is not installed on most Windows users' computers, so you need to use the pre-built downloads from the wxGUI extension tool.
* Not all the GRASS [[Addons]] are available from the [[wxGUI]] extension manager. Problems still exist with running Python scripts. The command line version of {{cmd|g.extension}} requires the full [[osgeo4w]] build environment, which is not installed on most Windows users' computers, so you need to use the pre-built downloads from the wxGUI extension tool. The wxGUI manager will download the nightly pre-built Addon executables ([http://wingrass.fsv.cvut.cz/grass64/addons/ Status of winGRASS 6 Addons] availability).


==== Tcl/Tk issues ====
==== Tcl/Tk issues ====
Line 195: Line 190:


* metacharacter escape in "sh -c '$cmd'"
* metacharacter escape in "sh -c '$cmd'"
* modules not working: <strike>v.neighbors, v.kernel, r.cost</strike>
* <strike>Cannot open Help pages.</strike>
* Have to type "exit" in the console to save ~/.grassrc file. Then, close gis.m to finish the session.
* Have to type "exit" in the console to save ~/.grassrc file. Then, close gis.m to finish the session.
* A previous installation of grass under cygwin is likely to cause problems with WinGrass. Follow the directions to remove cygwin at http://cygwin.com/faq/faq-nochunks.html#faq.setup.uninstall-all
* A previous installation of grass under cygwin is likely to cause problems with WinGrass. Follow the directions to remove cygwin at http://cygwin.com/faq/faq-nochunks.html#faq.setup.uninstall-all
The following items cannot be fixed in the near future:
** can't read "_data(.gronsole.gronsole,4,donecmd)": no such element in array error
*** Could you be more precise about this error ? When does it occur ?


== Dealing with shell scripts or .bat files ==
== Dealing with shell scripts or .bat files ==
Line 224: Line 213:


* http://trac.osgeo.org/osgeo4w/wiki/pkg-grass
* http://trac.osgeo.org/osgeo4w/wiki/pkg-grass
== See also ==
* [[WinGRASS errors]] - Questions and answers for users


[[Category: Development]]
[[Category: Development]]
[[Category: WinGRASS]]

Latest revision as of 21:19, 19 August 2014

This page describes the current status of winGRASS 6 development as of mid-2013

Current status - Summary

The native windows port of GRASS is slowly coming to a stage where it can be considered mature beta status. All main functions seem to work, but much more testing is needed. The port is of the current SVN release branch 6 for GRASS 6.4. The only prior native port of an earlier version is 6.3.0.

The general idea is to reach a point where GRASS runs in MS-Windows without any kind of UNIX emulation. Currently this is possible but limits the use to compiled modules, as scripts are all of UNIX-shell type and cannot run within a Windows cmd.exe environment without a series of UNIX tools such as a shell, awk, sed, etc. So in order to run such scripts a collection of UNIX-like tools needs to be installed, such as Msys or Gnuwin32+Shell.

Another major feature not available in the MS-Windows version are the old-style interactive X monitors (i.e. the x0 monitors opened with 'd.mon x0'). Only direct rendering works currently. Display is thus "limited" to the wxPython and Tcl/Tk GUIs. Modules like i.points and d.zoom will not work due to their interactive monitor requirements (see #Known_Issues).

Installing binary snapshots

Regular binary snapshots for Windows are available from the main GRASS download page.

Compiling by yourself

Guide

All the information needed for compiling yourself can be found in Compiling GRASS on MS-Windows

See also BuildingOnWindows


Nullsoft installer

See http://trac.osgeo.org/grass/browser/grass/branches/develbranch_6/mswindows

New winGRASS installer 1 New winGRASS installer 2 New winGRASS installer 3

  • Note the "Important Microsoft Runtime Libraries" option. Some of the software which ships with GRASS will not run if these system libraries are not already present, and unfortuantely Microsoft does not install them by default, you need to install the .Net framework or Visual C++ compiler runtime support to get them. These libraries are not part of GRASS but we give the user the opportunity to download and install them during the install if they are needed. Typically a computer with a lot of software already installed may have them, a new computer is likely to be missing them. If they are not installed the symptom is that the GRASS window momentarily flashes on the screen then disappears at start up, closing before you can see the error message.
See #Platform specific issues below for more details and download links.

Known Issues

See also

General

  • Spaces in path names
    • GIS data directory: It is generally safe to have spaces in your GIS data directory path, but there are few spots where it might still get confused and chop the path off at the first space. If you find one please report it to the bug tracker, the sooner we know about it the sooner we can fix it.
Workaround: if this is causing problems for you the quick solution is to rename the GIS data directory and replace all spaces with underscores (_).
  • The d.mon X monitors won't work. These use UNIX pipes and won't work on Windows without a lot of work.
Solution: use d.mon wx0 or the wxGUI (winGRASS 7)

Won't fix (at least not immediately)

Issues listed here are rather impossible to fix due to the different nature of native Windows. Or, lend us a hand and let's try harder!

  • No X monitors in winGRASS 6:

This means that you cannot launch any monitor launched with d.mon (x0, PNG, PS, etc). The only way you can render is directly to a file. But you cannot directly display to screen from the command line. This will be solved in GRASS 7 with a new rendering system and possibly via the new wxgrass GUI. So no work will probably be put into this until then.

The absence of monitors also makes impossible the use of interactive modules based on these monitors, such as:

    • i.class. However, it has been integrated into GRASS 7's wxGUI as g.gui.iclass (winGRASS 7)
    • i.ortho.photo/photo.2image
    • i.ortho.photo/photo.2target
    • i.points
    • i.vpoints

i.points and i.vpoints have already been replaced by the g.gui.gcp georectifier module (File -> Georectify). Volunteers needed for i.ortho.* GUI.

Another module affected is d.vect.thematic which uses monitors. This will hopefully be replaced by a C-version in a not too far future.

  • Scripts need *nix-like shell

All current GRASS 6.4 scripts are written in shell language. This means they need a shell, and several related tools (awk, sed, etc), to function. The actual WinGrass 6.4-installer includes Msys, so all shell-scripts should work.

In 7.0, these scripts have been rewritten in Python, thus totally eliminating the need for any shell, see WinGRASS 7 Current Status and GRASS GIS 7 - New Features.

Missing modules

  • The r.le landscape modelling suite:
    • r.le.setup, r.le.trace: not ported yet
Solution: use r.li.*
    • r.le.pixel, r.le.patch: available
  • Some GUI helper scripts such as g.change.gui.py and v.type.py
    • v.type => in the wx-command-line choice confusion of v.type, 1x v.type_wrapper.py and 3x v.type_wrapper.sh
    • v.type_wrapper.py crashes
  • The wxnviz 3D visualization module for the new wxGUI. Use NVIZ available from the old Tcl/Tk GIS.m GUI instead.
use winGRASS 7
  • v.out.gpsbabel fails to start m.proj although present
Use v.out.gps
  • i.ortho.photo => greyed out, requires xterm unavailable in MS-Windows
Work in progress in winGRASS7
  • i.class => greyed out, requires xterm unavailable in MS-Windows
integrated into GRASS 7's wxGUI as g.gui.iclass (winGRASS 7)
  • r.digit => greyed out, requires xterm unavailable in MS-Windows

Platform specific issues

XP/2000

If the GRASS GUI startup fails with "[Error 14001]" in the MSys terminal on a relatively fresh install of XP, the solution is to install some missing DLL files from Microsoft which apparently don't come standard. If these library files are missing, Quantum GIS and other software from the OSGeo4W stack will likely encounter the same trouble as well.

You'll need to install a number of packages: (in order)

  • MS's Windows Installer 3.1 Redistributable (v2)
http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=25
  • MS's .net framework 3.5 downloader
http://www.microsoft.com/download/en/details.aspx?id=21
  • MS's Visual C++ 2010 Redistributable Package:
http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=5555

It is recommended to run Windows updates after installing these.

Windows7

  • Missing MSVCR71.dll or MSVCP100.dll library causes GRASS to exit immediately upon startup.
For the solution, see WinGRASS errors

ToDo

Dependencies

GRASS Dependencies
  • add the FFMPEG support in GRASS (reports an error in building OGSF library; probably needs to specify -lavutil in gcc command) ***
Non-Free GDAL Plugins

(can't be shipped as part of the GRASS package directly due to various levels of non-freeness, but can be made into user-installable plugins)

  • ECW support in GDAL */**
  • JPEG2000 support in GDAL (through Jasper or Kadaku *) **
  • OGDI support in GDAL *
  • MrSID support in GDAL */**
GRASS and GDAL Dependencies
  • add the Xerces support in both GDAL and GRASS *
  • add the ODBC support in both GDAL and GRASS */**
  • add the MySQL support in both GDAL and GRASS */**
Miscellaneus Dependencies
  • add the OpenSSL support in both PostgreSQL and SQLite *


* needs to build related libraries from source in MinGW
** needs to check the licences first
*** FFMPEG has been already succesfully built on MinGW

Internal Libraries

  • parser: find out why launching a module from the command line without parameters does not call module GUI

Vector modules

  • v.in.ascii crashes on files with irregular line length (see this thread) - still true, 2014?

Raster modules

  • The wxGUI has an issue when trying to run r.mapcalc with the || "or" operator from the wxGUI built-in command entry box on the command console tab of the Layer Manager. You can work around this by running r.mapcalc using the Map Calculator GUI, or from a real command line (in that case remember to "quote" the expression).
  • The same wxGUI built-in command entry box on the command console tab requires file names with paths to be fully "quoted", e.g. input="C:\data\positions.csv", or else the "\" characters are lost.

GRASS 6 Addons

  • Not all the GRASS Addons are available from the wxGUI extension manager. Problems still exist with running Python scripts. The command line version of g.extension requires the full osgeo4w build environment, which is not installed on most Windows users' computers, so you need to use the pre-built downloads from the wxGUI extension tool. The wxGUI manager will download the nightly pre-built Addon executables (Status of winGRASS 6 Addons availability).

Tcl/Tk issues

Miscellaneous

  • metacharacter escape in "sh -c '$cmd'"
  • Have to type "exit" in the console to save ~/.grassrc file. Then, close gis.m to finish the session.
  • A previous installation of grass under cygwin is likely to cause problems with WinGrass. Follow the directions to remove cygwin at http://cygwin.com/faq/faq-nochunks.html#faq.setup.uninstall-all

Dealing with shell scripts or .bat files

Bourne shell scripts require MSys (or some other Bourne shell), but you don't need to start GRASS from MSys.

The main issue with scripts is that Windows doesn't understand the "#!" notation used to specify the interpreter.

All of the supplied scripts in $GISBASE/scripts have a corresponding .bat file in $GISBASE/bin which invokes script via %GRASS_SH%. This allows you to run those scripts from the Windows command prompt.

If you write scripts of your own, you need to either add a corresponding .bat file, or give the script a .sh extension and associate that with the shell, e.g. via the ftype and assoc commands. You can use the PATHEXT variable to eliminate the need to type the extension.

Other libraries

GDAL

  • lib/gis/OBJ.*/fmode.o is needed for any GRASS related modules.
  • modified ltmain.sh to install binary files from wrapper scripts.
  • see also GDAL Building With MinGW

Related efforts

See also