R.stream.* modules: Difference between revisions

From GRASS-Wiki
Jump to navigation Jump to search
No edit summary
(at least mention r.stream.extract)
 
(30 intermediate revisions by 4 users not shown)
Line 1: Line 1:
Modules r.stream.order r.stream.basins, r.stream.distance and r.stream.stats are prepared to perform Hortonian analysis in GRASS GIS. Modules can work with outputs data of r.watershed and r.stream.extract being preparing by Markus Metz.
== Overview ==
 
Modules {{AddonCmd|r.stream.order}}, {{AddonCmd|r.stream.basins}}, {{AddonCmd|r.stream.distance}}, and {{AddonCmd|r.stream.stats}} are prepared to perform Hortonian analysis in GRASS GIS. Modules can work with outputs data of {{cmd|r.watershed}} and {{AddonCmd|r.stream.extract}} being prepared by Markus Metz.


The tutorial/presentation was prepared with North Carolina Dataset.
The tutorial/presentation was prepared with North Carolina Dataset.


[http://grass.osgeo.org/download/data.php http://grass.osgeo.org/download/data.php]
[http://grass.osgeo.org/download/sample-data/ http://grass.osgeo.org/download/sample-data/]


As a base map elev_ned_30_m was used. Regions setings for analysis:
As a base map 'elev_ned_30_m' was used. Regions settings for analysis:
<pre>
<pre>
projection: 99 (Lambert Conformal Conic)
projection: 99 (Lambert Conformal Conic)
Line 22: Line 24:
</pre>
</pre>


[[File:Elevation_with_streams.jpg||350px|thumb|left|Digital elevation model with streams]]
[[File:Elevation_with_streams.jpg||350px|thumb|center|Digital elevation model with streams]]


Because r.stream.extract is still in progress analysis will be based on r.watershed results. Stream network has been obtained with r.watershed in MFD mode:
Because r.stream.extract is still in progress (still valid? 4/2011) analysis will be based on r.watershed results. Stream network has been obtained with r.watershed in MFD mode:


<source lang="bash">r.watershed -f elevation=elev threshold=700 accumulation=accum drainage=dirs stream=streams convergence=5</source>
<pre>r.watershed -f elevation=elev threshold=700 accumulation=accum drainage=dirs stream=streams convergence=5</pre>


Be sure you set the region for analysis before run it.
Be sure you set the region for analysis before run it.


<source lang="bash">g.region rast=elev_ned_30_m</source>
<pre>g.region rast=elev_ned_30_m</pre>
 
For future analysis following map produced by r.watershed are requied: ''streams'' with streams network, ''dirs'' with flow direction and ''accum'' with flow accumulation.


For future analysis following map produced by r.watershed are required: ''streams'' with streams network, ''dirs'' with flow direction and ''accum'' with flow accumulation.


== r.stream.order ==
== r.stream.order ==
Module r.stream.strahler may order stream network according four most popular ordering systems. Module can create both all four at once or every order separete
Module {{AddonCmd|r.stream.order}} may order stream network according four most popular ordering systems. Module can create both all four at once or every order separate. The accumulation mas is an option necessary if you want to determine main channels in Horton and Hack Ordering based on accumulation instead of channel length
 
<source lang="bash">r.stream.order stream=streams dir=dirs accum=accum strahler=strahler shreve=shreeve horton=horton hack=hack</source>
[[File:strahler.png]]
 
[[File:horton.png]]


[[File:shreve.png]]
<pre>r.stream.order stream=streams dir=dirs strahler=strahler shreve=shreeve horton=horton hack=hack</pre>


[[File:hack.png]]
<gallery widths=200 heights=200 perrow>
File:Ord_strahler.png|Strahler Stream Order
File:Ord_horton.png|Horton Stream Order
File:Ord_shreeve.png|Shreve Stream Magnitude
File:Ord_hack.png|Main (Hack) Stream Order
</gallery>
To obtain Scheidegger's stream order is just enough multiply Shreve stream magnitude x2.


== r.stream.basins ==
== r.stream.basins ==
Module r.stream.basins is prepared to delineate basins and subasins according user rules. I covers (in very small part) funcionalty of r.water.outlet and r.watershed but addationaly has much more posibilities which are presented in this section of tutorial. Module is prepared to delineate number of basins in one step. It requires only two maps direciton and streams. In stream map we can store all information required to proper delineation.
Module {{AddonCmd|r.stream.basins}} is prepared to delineate basins and subbasins according user rules. It covers (in very small part) functionality of {{cmd|r.water.outlet}} and {{cmd|r.watershed}} but additionally it has much more possibilities which are presented in this section of tutorial. Module is prepared to delineate number of basins in one step. It requires only two maps direction and streams. In stream map we can store all information required to proper delineation.


To delinaate all basins with categories of streams simply use:
To delineate all basins with categories of streams simply use:


<source lang="bash">r.stream.basins dir=dirs stream=streams basins=bas_basins_elem</source>
<pre>r.stream.basins dir=dirs stream=streams basins=bas_basins_elem</pre>


[[File:bas_elem.png]]
[[File:bas_elem.png||350px|thumb|center|Elementary basins]]


To delineate all basins definied by outlets, ignoring subbasins use similar code but with - l flag. That flag ignores all nodes and uses only real outlets (in most cases that on image border). That option is very useful to determine major and minor basins in area.
To delineate all basins defined by outlets, ignoring subbasins use similar code but with -l flag. That flag ignores all nodes and uses only real outlets (in most cases that on image border). That option is very useful to determine major and minor basins in area.


<source lang="bash">r.stream.basins -l dir=dirs stream=streams basins=bas_basins_last</source>
<pre>r.stream.basins -l dir=dirs stream=streams basins=bas_basins_last</pre>


[[File:bas_basin_last.png]]
[[File:bas_basin_last.png|350px|thumb|center|Main basins]]


To delinaeate only one or more particular basin it require to reclass stream basin to theplaned set. The fastest method is r.reclass but also r.mapcalc may repcalce r.reclass. The output is the last (downstream) cell of given stream:
To delineate only one or more particular basin it require to reclass stream basin to the planned set. The fastest method is {{cmd|r.reclass}} but also {{cmd|r.mapcalc}} may replace r.reclass. The output is the last (downstream) cell of given stream:


<pre>
<pre>
Line 68: Line 70:
* = NULL' > tmp1
* = NULL' > tmp1


r.reclass input=streams output=sel_streams_1 <tmp1
r.reclass input=streams output=sel_streams_1 rules=tmp1
r.stream.basins dir=dirs stream=streams basins=bas_basin_1  
r.stream.basins dir=dirs stream=sel_streams_1 basins=bas_basin_1  
</pre>
</pre>


[[File:basin_1.png]]
[[File:basin_1.png|350px|thumb|center|One basin]]


It is also possible to use more than one stream as an output. If some stream will be tributurary of others it will produce subbasins in main basins. It can be eliminated with -l flag only if streams are in sequence.
It is also possible to use more than one stream as an output. If some stream will be tributary of others it will produce subbasins in main basins. It can be eliminated with -l flag only if streams are in sequence.


<pre>
<pre>
Line 80: Line 82:
252 = 252
252 = 252
188 = 188
188 = 188
* = NULL' >tmp
* = NULL' >tmp3
 
r.reclass input=streams output=sel_streams_3 rules=tmp3
r.stream.basins dir=dirs stream=sel_streams_3 basins=bas_basin_3
</pre>
[[File:basin_3.png|350px|thumb|center|Three basins]]
 
Basin delineated in previous step can be used to cut off streams of that basin. In next step these streams can be used to delineate subbasins of given basin:
 
<pre>
r.mapcalc "sel_all_streams_42 = if(bas_basin_1,streams,null())"
r.stream.basins dir=dirs stream=sel_all_streams_42 basins=bas_elem_42
</pre>
[[File:Bas_42_elems.png|350px|thumb|center|main basin and subbasins with streams]]
 
 
To delineate basins of particular order we must use the following procedure:
 
<pre>
echo '2 = 2
* = NULL' > tmp2
 
r.reclass input=ord_strahler output=sel_strahler_2 rules=tmp2
r.stream.basins -c dir=dirs stream=sel_strahler_2 basins=bas_basin_strahler_2
</pre>
 
The flag -c must be used because all streams has category 2 (result of reclass operation). If we need basins with category of streams we must use little different approach. First with mapcalc procedure extract that streams with order 2, next use -l flag to create basins with category of last (downstream) segments
 
<pre>
r.mapcalc "sel_strahler_cat_2 = if(ord_strahler==2,streams,null())"
r.stream.basins -l dir=dirs stream=sel_strahler_cat_2 basins=bas_basin_strahler_2
</pre>
 
[[File:Bas_sequence_categories.png|350px|thumb|center|Basin of order 2 with unique categories]]
 
 
To determine areas of contribution to streams of particular order we need only use as streams the result of ordering.
 
<pre>
r.stream.basins dir=dirs stream=ord_strahler basins=bas_basin_strahler
</pre>
[[File:Bas_contrib_strahler.png|350px|thumb|center|Areas of contribution to stream of particular order]]
 
Basin can be terminated according user's input. For now input must be in raster format (vector format is planned in the feature). What is important input can be anything: lines, polygons or points. But it shall overlapping with streams. It is very useful in situation, when we cannot determine the real route and identifier of streams but we can determine its most probable route (for example in hydrological simulation) we can mark with any area in place where link is most probable.
[[File:basin_points.png|350px|thumb|center|Basin outlets of custom shape]]
 
The last example is a little beat complex but also easy to calculate. One of the most popular hydrological modeling is determination of areas of potential source of pollution. The example will be done for lake marked with FULL_HYDR 8056 in North Carolina sample dataset. The lake was extracted and converted to binary raster map. Next we can determine all basins contributing to the lake, additionally with areas of lake where every basin contributes.
 
<pre>
v.extract -d input=lakes@PERMANENT output=lake8056 type=area layer=1 'where=FULL_HYDRO = 8056' new=-1
v.to.rast input=lake8056@horton output=lake8056 use=val type=area layer=1 value=1
r.mapcalc "sel_streams_lake = if(lake8056,streams,null())"
r.stream.basins dir=dirs stream=sel_streams_lake basins=bas_basin_lake
</pre>
<gallery widths=300 heights=300 perrow>
File:full_hydo_8056.png|Lake
File:bas_lake_dengerous.png|Areas of contribution to lake
</gallery>
 
== r.stream.distance ==
Module {{AddonCmd|r.stream.distance}} has been prepared to calculate distance to streams and outlets and elevation above streams and outlets. In outlets mode it can also calculate parameters for subbasins.
The distance are calculated metres. It support both projected and LL locations. The distance is calculated for flat maps. To add topography correction use mapcalc formula
 
<pre>echo' dist_corrected = sqrt(distance^2 + elevation ^2)'|r.mapcalc</pre>
 
Distance and elevation above streams:
 
<pre>r.stream.distance dir=dirs stream=streams dem=elev distance=distance_stream elevation=elevation_stream</pre>
 
<gallery widths=300 heights=300 perrow>
File:Stream_distance.png|Distance to the stream
File:Stream_elevation.png|Elevation above the stream
</gallery>
 
Distance and elevation above outlets:
 
<pre>r.stream.distance dir=dirs stream=streams dem=elev distance=distance_stream elevation=elevation_stream</pre>
 
<gallery widths=300 heights=300 perrow>
File:Distance_outlets.png|Distance to the outlet
File:Elevation_outlet.png|Elevation above the outlet
</gallery>
 
Distance and elevation above outlets in subbasin mode:
 
<pre>r.stream.distance -o dir=dirs stream=streams dem=elev distance=distance_outlets elevation=elevation_outlets</pre>
 
<gallery widths=300 heights=300 perrow>
File:Distance_outlets.png|Distance to the outlet
File:Elevation_outlet.png|Elevation above the outlet
</gallery>
 
<pre>r.stream.distance -o -s dir=dirs stream=streams dem=elev distance=distance_outlets elevation=elevation_outlets</pre>
 
<gallery widths=300 heights=300 perrow>
File:Dstance_outlet_sub.png|Distance to the outlet of subbasin
File:Elevation_out_subbasin.png|Elevation above the outlet of subbasin
</gallery>
 
== r.stream.extract ==
 
Module {{cmd|r.stream.extract}} extracts streams in both raster and vector format from a required input elevation map and optional input accumulation map.
 
== r.stream.stats ==
Module {{AddonCmd|r.stream.stats}} was prepared to calculate statistics according ordered stream network map. These statistics are calculated according formulas given by R.Horton (1945). Because Horton do not defined precisely what is stream slope, I proposed 2 different approaches: first (slope) use cell-by-cell slope calculation, second (gradient) use difference between elevation of outlet and source of every channel to its length to calculate formula. Bifurcation ratio for every order is calculated according formula: n_streams[1]/n_stream[i+1] where i the current order and i+1 next higher order. For max order of the map number of streams is zero. Rest of the ratios are calculated in similar mode. The bifurcation and other ratios for the whole catchment (map) is calculated as mean i.e sum of all bifurcation ratio / max_order-1 (for max_order stream bifurcation ratio = 0).
It is strongly recommended to extract stream network using basin map created with {{AddonCmd|r.stream.basin}}. If whole stream order map is used the calculation will be performed but results may not have hydrological sense.
 
Stream network extracted from the whole network:
 
[[File:Bas_sel_streams.png|350px|thumb|center|Basin with selected streams]]
 
 
<pre>
echo 'tmp_stream=if(bas_basin_3==242,streams,null())'|r.mapcalc
r.stream.stats r.stream.stats stream=tmp_stream dir=dirs dem=elev
</pre>
 
summary result:
 
<pre>
Summary:
Max order | Tot.N.str. | Tot.str.len. | Tot.area. | Dr.dens. | Str.freq.
        3 |        14 |      28.4911 |  33.0822 |  0.8612 |  0.4232
 
Stream ratios with standard deviations:
Bif.rt. | Len.rt. | Area.rt. | Slo.rt. | Grd.rt.
  3.1667 |  0.5807 |  0.2590 |  1.6552 |  2.1745
  0.2357 |  0.2062 |  0.0385 |  0.0679 |  0.8689
 
Order | Avg.len |  Avg.ar  |  Avg.sl |  Avg.grad. | Avg.el.dif
num  |  (km)  |  (km2)  |  (m/m)  |    (m/m)  |    (m) 
    1 |  1.6473 |  2.1943 |  0.0117 |    0.0096 | 13.7182
    2 |  2.2676 |  7.6665 |  0.0073 |    0.0034 |  8.5856
    3 |  5.2147 |  33.0822 |  0.0043 |    0.0022 | 11.5075
 
Order | Std.len |  Std.ar  |  Std.sl |  Std.grad. | Std.el.dif
num  |  (km)  |  (km2)  |  (m/m)  |    (m/m)  |    (m) 
    1 |  1.4628 |  1.8567 |  0.0023 |    0.0026 | 10.6447
    2 |  2.8040 |  9.8164 |  0.0010 |    0.0020 | 10.0869
    3 | -0.0000 |  0.0000 | -0.0000 |    -0.0000 | -0.0000
 
Order | N.streams | Tot.len (km) | Tot.area (km2)
    1 |        10 |      16.4734 | 21.9429
    2 |        3 |      6.8029 | 22.9995
    3 |        1 |      5.2147 | 33.0822


r.reclass input=streams output=sel_streams_1 <tmp1
Order | Bif.rt. | Len.rt. | Area.rt. | Slo.rt. | Grd.rt. | d.dens. | str.freq.
r.stream.basins dir=dirs stream=streams basins=bas_basin_3
    1 |  3.3333 |  0.7265 |  0.2862 |  1.6072 |  2.7888 |  0.7507 |  0.4557
    2 |  3.0000 |  0.4349 |  0.2317 |  1.7033 |  1.5601 |  0.2958 |  0.1304
    3 |  0.0000 |  0.0000 |  0.0000 |  0.0000 |  0.0000 |  0.1576 |  0.0302
</pre>
</pre>


[[File:basin_3.png]]
== See also ==
 
[[R.basin]]
 
== References ==
 
* J Jasiewicz, M Metz, 2011: A new GRASS GIS toolkit for Hortonian analysis of drainage networks, Computers & Geosciences. [http://dx.doi.org/10.1016/j.cageo.2011.03.003 DOI]
 
[[Category: Documentation]]
[[Category: Hydrology]]

Latest revision as of 20:06, 3 October 2016

Overview

Modules r.stream.order, r.stream.basins, r.stream.distance, and r.stream.stats are prepared to perform Hortonian analysis in GRASS GIS. Modules can work with outputs data of r.watershed and r.stream.extract being prepared by Markus Metz.

The tutorial/presentation was prepared with North Carolina Dataset.

http://grass.osgeo.org/download/sample-data/

As a base map 'elev_ned_30_m' was used. Regions settings for analysis: 

projection: 99 (Lambert Conformal Conic)
zone:       0
datum:      nad83
ellipsoid:  a=6378137 es=0.006694380022900787
north:      228500
south:      215000
west:       630000
east:       645000
nsres:      30
ewres:      30
rows:       450
cols:       500
cells:      225000
Digital elevation model with streams

Because r.stream.extract is still in progress (still valid? 4/2011) analysis will be based on r.watershed results. Stream network has been obtained with r.watershed in MFD mode: 

r.watershed -f elevation=elev threshold=700 accumulation=accum drainage=dirs stream=streams convergence=5

Be sure you set the region for analysis before run it. 

g.region rast=elev_ned_30_m

For future analysis following map produced by r.watershed are required: streams with streams network, dirs with flow direction and accum with flow accumulation.

r.stream.order

Module r.stream.order may order stream network according four most popular ordering systems. Module can create both all four at once or every order separate. The accumulation mas is an option necessary if you want to determine main channels in Horton and Hack Ordering based on accumulation instead of channel length 

r.stream.order stream=streams dir=dirs strahler=strahler shreve=shreeve horton=horton hack=hack
  • Strahler Stream Order

    Strahler Stream Order

  • Horton Stream Order

    Horton Stream Order

  • Shreve Stream Magnitude

    Shreve Stream Magnitude

  • Main (Hack) Stream Order

    Main (Hack) Stream Order

To obtain Scheidegger's stream order is just enough multiply Shreve stream magnitude x2.

r.stream.basins

Module r.stream.basins is prepared to delineate basins and subbasins according user rules. It covers (in very small part) functionality of r.water.outlet and r.watershed but additionally it has much more possibilities which are presented in this section of tutorial. Module is prepared to delineate number of basins in one step. It requires only two maps direction and streams. In stream map we can store all information required to proper delineation.

To delineate all basins with categories of streams simply use: 

r.stream.basins dir=dirs stream=streams basins=bas_basins_elem
Elementary basins

To delineate all basins defined by outlets, ignoring subbasins use similar code but with -l flag. That flag ignores all nodes and uses only real outlets (in most cases that on image border). That option is very useful to determine major and minor basins in area. 

r.stream.basins -l dir=dirs stream=streams basins=bas_basins_last
Main basins

To delineate only one or more particular basin it require to reclass stream basin to the planned set. The fastest method is r.reclass but also r.mapcalc may replace r.reclass. The output is the last (downstream) cell of given stream: 

echo '42=42
* = NULL' > tmp1

r.reclass input=streams output=sel_streams_1 rules=tmp1
r.stream.basins dir=dirs stream=sel_streams_1 basins=bas_basin_1
One basin

It is also possible to use more than one stream as an output. If some stream will be tributary of others it will produce subbasins in main basins. It can be eliminated with -l flag only if streams are in sequence. 

echo '42 = 42
252 = 252
188 = 188
* = NULL' >tmp3

r.reclass input=streams output=sel_streams_3 rules=tmp3
r.stream.basins dir=dirs stream=sel_streams_3 basins=bas_basin_3
Three basins

Basin delineated in previous step can be used to cut off streams of that basin. In next step these streams can be used to delineate subbasins of given basin: 

r.mapcalc "sel_all_streams_42 = if(bas_basin_1,streams,null())"
r.stream.basins dir=dirs stream=sel_all_streams_42 basins=bas_elem_42
main basin and subbasins with streams


To delineate basins of particular order we must use the following procedure: 

echo '2 = 2
* = NULL' > tmp2

r.reclass input=ord_strahler output=sel_strahler_2 rules=tmp2
r.stream.basins -c dir=dirs stream=sel_strahler_2 basins=bas_basin_strahler_2

The flag -c must be used because all streams has category 2 (result of reclass operation). If we need basins with category of streams we must use little different approach. First with mapcalc procedure extract that streams with order 2, next use -l flag to create basins with category of last (downstream) segments 

r.mapcalc "sel_strahler_cat_2 = if(ord_strahler==2,streams,null())"
r.stream.basins -l dir=dirs stream=sel_strahler_cat_2 basins=bas_basin_strahler_2
Basin of order 2 with unique categories


To determine areas of contribution to streams of particular order we need only use as streams the result of ordering. 

r.stream.basins dir=dirs stream=ord_strahler basins=bas_basin_strahler
Areas of contribution to stream of particular order

Basin can be terminated according user's input. For now input must be in raster format (vector format is planned in the feature). What is important input can be anything: lines, polygons or points. But it shall overlapping with streams. It is very useful in situation, when we cannot determine the real route and identifier of streams but we can determine its most probable route (for example in hydrological simulation) we can mark with any area in place where link is most probable.

Basin outlets of custom shape

The last example is a little beat complex but also easy to calculate. One of the most popular hydrological modeling is determination of areas of potential source of pollution. The example will be done for lake marked with FULL_HYDR 8056 in North Carolina sample dataset. The lake was extracted and converted to binary raster map. Next we can determine all basins contributing to the lake, additionally with areas of lake where every basin contributes. 

v.extract -d input=lakes@PERMANENT output=lake8056 type=area layer=1 'where=FULL_HYDRO = 8056' new=-1 
v.to.rast input=lake8056@horton output=lake8056 use=val type=area layer=1 value=1
r.mapcalc "sel_streams_lake = if(lake8056,streams,null())"
r.stream.basins dir=dirs stream=sel_streams_lake basins=bas_basin_lake
  • Lake

    Lake

  • Areas of contribution to lake

    Areas of contribution to lake

r.stream.distance

Module r.stream.distance has been prepared to calculate distance to streams and outlets and elevation above streams and outlets. In outlets mode it can also calculate parameters for subbasins. The distance are calculated metres. It support both projected and LL locations. The distance is calculated for flat maps. To add topography correction use mapcalc formula 

echo' dist_corrected = sqrt(distance^2 + elevation ^2)'|r.mapcalc

Distance and elevation above streams: 

r.stream.distance dir=dirs stream=streams dem=elev distance=distance_stream elevation=elevation_stream
  • Distance to the stream

    Distance to the stream

  • Elevation above the stream

    Elevation above the stream

Distance and elevation above outlets: 

r.stream.distance dir=dirs stream=streams dem=elev distance=distance_stream elevation=elevation_stream
  • Distance to the outlet

    Distance to the outlet

  • Elevation above the outlet

    Elevation above the outlet

Distance and elevation above outlets in subbasin mode: 

r.stream.distance -o dir=dirs stream=streams dem=elev distance=distance_outlets elevation=elevation_outlets
  • Distance to the outlet

    Distance to the outlet

  • Elevation above the outlet

    Elevation above the outlet 

r.stream.distance -o -s dir=dirs stream=streams dem=elev distance=distance_outlets elevation=elevation_outlets
  • Distance to the outlet of subbasin

    Distance to the outlet of subbasin

  • Elevation above the outlet of subbasin

    Elevation above the outlet of subbasin

r.stream.extract

Module r.stream.extract extracts streams in both raster and vector format from a required input elevation map and optional input accumulation map.

r.stream.stats

Module r.stream.stats was prepared to calculate statistics according ordered stream network map. These statistics are calculated according formulas given by R.Horton (1945). Because Horton do not defined precisely what is stream slope, I proposed 2 different approaches: first (slope) use cell-by-cell slope calculation, second (gradient) use difference between elevation of outlet and source of every channel to its length to calculate formula. Bifurcation ratio for every order is calculated according formula: n_streams[1]/n_stream[i+1] where i the current order and i+1 next higher order. For max order of the map number of streams is zero. Rest of the ratios are calculated in similar mode. The bifurcation and other ratios for the whole catchment (map) is calculated as mean i.e sum of all bifurcation ratio / max_order-1 (for max_order stream bifurcation ratio = 0). It is strongly recommended to extract stream network using basin map created with r.stream.basin. If whole stream order map is used the calculation will be performed but results may not have hydrological sense.

Stream network extracted from the whole network:

Basin with selected streams


echo 'tmp_stream=if(bas_basin_3==242,streams,null())'|r.mapcalc
r.stream.stats r.stream.stats stream=tmp_stream dir=dirs dem=elev

summary result: 

Summary:
Max order | Tot.N.str. | Tot.str.len. | Tot.area. | Dr.dens. | Str.freq. 
        3 |         14 |      28.4911 |   33.0822 |   0.8612 |  0.4232 

Stream ratios with standard deviations:
 Bif.rt. | Len.rt. | Area.rt. | Slo.rt. | Grd.rt. 
  3.1667 |  0.5807 |   0.2590 |  1.6552 |  2.1745
  0.2357 |  0.2062 |   0.0385 |  0.0679 |  0.8689

Order | Avg.len |  Avg.ar  |  Avg.sl |  Avg.grad. | Avg.el.dif
 num  |   (km)  |  (km2)   |  (m/m)  |    (m/m)   |     (m)   
    1 |  1.6473 |   2.1943 |  0.0117 |     0.0096 | 13.7182
    2 |  2.2676 |   7.6665 |  0.0073 |     0.0034 |  8.5856
    3 |  5.2147 |  33.0822 |  0.0043 |     0.0022 | 11.5075

Order | Std.len |  Std.ar  |  Std.sl |  Std.grad. | Std.el.dif
 num  |   (km)  |  (km2)   |  (m/m)  |    (m/m)   |     (m)   
    1 |  1.4628 |   1.8567 |  0.0023 |     0.0026 | 10.6447
    2 |  2.8040 |   9.8164 |  0.0010 |     0.0020 | 10.0869
    3 | -0.0000 |   0.0000 | -0.0000 |    -0.0000 | -0.0000

Order | N.streams | Tot.len (km) | Tot.area (km2)
    1 |        10 |      16.4734 | 21.9429
    2 |         3 |       6.8029 | 22.9995
    3 |         1 |       5.2147 | 33.0822

Order | Bif.rt. | Len.rt. | Area.rt. | Slo.rt. | Grd.rt. | d.dens. | str.freq.
    1 |  3.3333 |  0.7265 |   0.2862 |  1.6072 |  2.7888 |  0.7507 |  0.4557
    2 |  3.0000 |  0.4349 |   0.2317 |  1.7033 |  1.5601 |  0.2958 |  0.1304
    3 |  0.0000 |  0.0000 |   0.0000 |  0.0000 |  0.0000 |  0.1576 |  0.0302

See also

R.basin

References

  • J Jasiewicz, M Metz, 2011: A new GRASS GIS toolkit for Hortonian analysis of drainage networks, Computers & Geosciences. DOI
Retrieved from "https://grasswiki.osgeo.org/w/index.php?title=R.stream.*_modules&oldid=23639"