Principal Components Analysis
Under Construction
This page is a short and practical introduction in Principal Component Analysis. It aims to highlight the importance of the values returned by PCA. In addition, it addresses numerical accuracy issues with respect to the default implementation of PCA in GRASS through the i.pca module.
Principal Component Analysis
Principal Component Analysis (PCA) is a dimensionality reduction technique used extensively in Remote Sensing studies (e.g. in change detection studies, image enhancement tasks and more). PCA is in fact a linear transformation applied on (usually) highly correlated multidimensional (e.g. multispectral) data. The input dimensions are transformed in a new coordinate system in which the produced dimensions (called principal components) contain, in decreasing order, the greatest variance related with unchanged landscape features.
PCA has two algebraic solutions:
- Eigenvectors of Covariance (or Correlation)
- Singular Value Decomposition
The SVD method is used for numerical accuracy [R Documentation]
Background
The basic steps of the transformation are:
- organizing a dataset in a matrix
- data centering (that is: subtracting the dimensions means from tehmself so the dataset has mean=0)
- calculate
- the covariance matrix (non-standartised PCA) or
- the correlation matrix (standartised PCA, also known as scaling)
- calculate
- the eigenvectors and eigenvalues of the covariance (or the correlation) matrix or
- the SVD
- sort variances in decreasing order (decreasing eigenvalues)
- project original dataset signals (PC's = eigenvector * input-data)
Solutions to PCA
The Eigenvector solution to PCA involves:
- calculation of
- the covariance matrix of the given multidimensional dataset (non-standardised PCA) or
- the correlation matrix of the given multidimensional dataset (standardised PCA)
- calculation of the eigenvalues and eigenvectors of the covariance (or correlation) matrix
- transformation of the input dataset using the eigenvalues as weighting coefficients
Terminology
eigenvalues represent the variance of the original data contained in each principal component.
eigenvectors act as weighting coefficients / represent the contribution of each original dimension the principal components.
Performing PCA with GRASS
- m.eigensystem
The m.eigensystem module implements the eigenvector solution to PCA. The respective function in R is princomp(). A comparison of their results confirms their almost identical performance. Specifically,
- the standard deviations (sdev) reported by princomp() are (almost) identical with the variances (eigenvalues) reported by m.eigensystem.
- princomp() scales (also referred as normalization) the eigenvectors and so does m.eigensystem. The scaled(=normalised) eigenvectors produced by m.eigensystem are marked with the capital letter N.
- i.pca
The i.pca module performs PCA based on the SVD solution without data centering and/or scaling. A comparison of the results derived by i.pca and R's prcomp() function confirms this. Specifically, i.pca yields the same eigenvectors as R's prcomp() function does with the following options:
prcomp(x, center=FALSE, scale=FALSE)
where x is a numeric or complex matrix (or data frame) which provides the data for the principal components analysis (R Documentation).
Issues concerning the i.pca module
??? To add... ???
Issues concerning R's princomp() function
- For some reason one loading (=eigenvector) is missing from the output of the default application of princomp() on objects derived from GRASS as described above.
Examples using SPOT imagery
Get the SPOT imagery from the Spearfish dataset: SPOT images from the Spearfish dataset
Eigenvectors solution
Based on the covariance matrix
Using m.eigensystem
Command in one line
(echo 3; r.covar spot.ms.1,spot.ms.2,spot.ms.3) | m.eigensystem
Output
r.covar: complete ... 100% E 1159.7452017844 .0000000000 88.38 V .6910021591 .0000000000 V .7205280412 .0000000000 V .4805108400 .0000000000 N .6236808478 .0000000000 N .6503301526 .0000000000 N .4336967751 .0000000000 W 21.2394712045 .0000000000 W 22.1470141296 .0000000000 W 14.7695575384 .0000000000 E 5.9705414972 .0000000000 .45 V .7119385973 .0000000000 V -.6358200627 .0000000000 V -.0703936743 .0000000000 N .7438340890 .0000000000 N -.6643053754 .0000000000 N -.0735473745 .0000000000 W 1.8175356507 .0000000000 W -1.6232096923 .0000000000 W -.1797107407 .0000000000 E 146.5031967184 .0000000000 11.16 V .2265837636 .0000000000 V .3474697082 .0000000000 V -.8468727535 .0000000000 N .2402770238 .0000000000 N .3684685345 .0000000000 N -.8980522763 .0000000000 W 2.9082771721 .0000000000 W 4.4598880523 .0000000000 W -10.8698904856 .0000000000
Using R's princomp() function
Launch R from within GRASS
R
Load spgrass6() and projection information in R
library(spgrass6) G <- gmeta6()
Read spot.ms bands
spot.ms <- readRAST6(c('spot.ms.1', 'spot.ms.2', 'spot.ms.3'))
Work around NA's
spot.ms.nas <- which(is.na(spot.ms@data$spot.ms.1) & is.na(spot.ms@data$spot.ms.2) & is.na(spot.ms@data$spot.ms.3)) spot.ms.values <- which(!is.na(spot.ms@data$spot.ms.1) & !is.na(spot.ms@data$spot.ms.2) & !is.na(spot.ms@data$spot.ms.3)) spot.ms.nonas <- spot.ms.values@data[spot.ms.values, ]
Command
princomp(spot.ms.nonas)
Output
Call: princomp(x = modis) Standard deviations: Comp.1 Comp.2 Comp.3 34.055018 12.103846 2.443468 3 variables and 1231860 observations.
Get loadings
princomp(spot.ms.nonas)$loadings
Loadings:
Comp.1 Comp.2 Comp.3
spot.ms.1 -0.624 0.240 0.744
spot.ms.2 -0.650 -0.368 -0.664
spot.ms.3 -0.434 0.898
Comp.1 Comp.2 Comp.3
SS loadings 1.000 1.000 1.000
Proportion Var 0.333 0.333 0.333
Cumulative Var 0.333 0.667 1.000
The bold and red colored loadings, that is, the eigen vectors of the first principal component, ease of the comparison with the results derived from GRASS' m.eigensystem module above. Note the missing eigen value in row 3, column 3. For some reason R refused to yield it.
Based on the correlation matrix
Using m.eigensystem
Command in one line
(echo 3; r.covar -r spot.ms.1,spot.ms.2,spot.ms.3) | m.eigensystem
Output
r.covar: complete ... 100% E 2.5897901435 .0000000000 86.33 V -.7080795162 .0000000000 V -.6979341819 .0000000000 V -.6128387525 .0000000000 N -.6062688915 .0000000000 N -.5975822957 .0000000000 N -.5247222419 .0000000000 W -.9756579133 .0000000000 W -.9616787268 .0000000000 W -.8444263177 .0000000000 E .0123265666 .0000000000 .41 V -.6690685456 .0000000000 V .6302711261 .0000000000 V .0552608155 .0000000000 N -.7265842171 .0000000000 N .6844516242 .0000000000 N .0600112449 .0000000000 W -.0806690651 .0000000000 W .0759912909 .0000000000 W .0066627528 .0000000000 E .3978832898 .0000000000 13.26 V .3005969725 .0000000000 V .3883277727 .0000000000 V -.7895613377 .0000000000 N .3232853332 .0000000000 N .4176378502 .0000000000 N -.8491555920 .0000000000 W .2039218921 .0000000000 W .2634375639 .0000000000 W -.5356302845 .0000000000
Using R's princomp() function
Perform PCA
princomp(spot.ms.nonas, cor=TRUE)
Output
Call: princomp(x = spot.ms.nonas, cor = TRUE) Standard deviations: Comp.1 Comp.2 Comp.3 1.6092826 0.6307795 0.1110256 3 variables and 1231860 observations.
Get loadings
princomp(spot.ms.nonas, cor=TRUE)$loadings
Output
Loadings:
Comp.1 Comp.2 Comp.3
spot.ms.1 -0.606 -0.323 0.727
spot.ms.2 -0.598 -0.418 -0.684
spot.ms.3 -0.525 0.849
Comp.1 Comp.2 Comp.3
SS loadings 1.000 1.000 1.000
Proportion Var 0.333 0.333 0.333
Cumulative Var 0.333 0.667 1.000
SVD solution
Using i.pca
Command
i.pca input=spot.ms.1,spot.ms.2,spot.ms.3 out=pca.spot.ms rescale=0,0
Output
Eigen values, (vectors), and [percent importance]:
PC1 1170.12 (-0.6251,-0.6536,-0.4268)[88.07%]
PC2 152.49 ( 0.2328, 0.3658,-0.9011)[11.48%]
PC3 6.01 ( 0.7450,-0.6626,-0.0765) [0.45%]
Using R's prcomp() function
The following example replicates i.pca's solution using the same data with data centering and without scaling (options center=TRUE and scale=FALSE). Note that these settings are the defaults.
Command
prcomp(spot.ms.nonas)
Output
Standard deviations:
[1] 34.055032 12.103851 2.443469
Rotation:
PC1 PC2 PC3
spot.ms.1 -0.6236808 0.2402770 -0.74383409
spot.ms.2 -0.6503302 0.3684685 0.66430538
spot.ms.3 -0.4336968 -0.8980523 0.07354738
In this example i.pca's performance seems to be identical to R's prcomp() function which means that data centering is applied prior to the actual PCA.
The three SPOT bands used in this example have the following ranges:
- spot.ms.1
min=24 max=254
- spot.ms.2
min=14 max=254
- spot.ms.3
min=12 max=254
Nevertheless, as shown in the examples using MODIS surface reflectance products (read below) in which the range of the bands varies significantly, i.pca's results do not match the results of R's prcomp() function with the parameter center set to TRUE. Instead, the results derived from i.pca are almost identical when the parameter center is set to FALSE.
The following example performs PCA without data centering and scaling (options center=FALSE and scale=FALSE).
Command
prcomp(spot.ms.nonas, center=FALSE, scale=FALSE)
Output
Standard deviations:
[1] 101.00927 15.79861 2.83775
Rotation:
PC1 PC2 PC3
spot.ms.1 -0.5605487 -0.3652694 0.7432116
spot.ms.2 -0.4726613 -0.5958032 -0.6493149
spot.ms.3 -0.6799827 0.7152600 -0.1613280
+++
The following example performs PCA with data centering and scaling (options center=TRUE and scale=TRUE)
Command
prcomp(spot.ms.nonas, center=TRUE, scale=TRUE)
Output
Standard deviations:
[1] 1.6092826 0.6307795 0.1110256
Rotation:
PC1 PC2 PC3
spot.ms.1 -0.6062688 0.3232856 -0.72658417
spot.ms.2 -0.5975823 0.4176378 0.68445170
spot.ms.3 -0.5247224 -0.8491555 0.06001103
Examples using MODIS surface reflectance products
Eigenvectors solution
Based on the covariance matrix
Using m.eigensystem
Command in one line
(echo 3; r.covar b02,b06,b07) | m.eigensystem
Output
- The E line is the eigen value. (Real part, imaginary part, percent importance)
- The V lines are the eigen vectors associated with E.
- The N lines are the V vectors normalized to have a magnitude of 1. These are the scaled eigen vectors that correspond to princomp()'s results presented in the following section.
- The W lines are the N vector multiplied by the square root of the magnitude of the eigen value (E).
r.covar: complete ... 100% E 778244.0258462029 .0000000000 79.20 V .5006581842 .0000000000 V .8256483300 .0000000000 V .6155834548 .0000000000 N .4372107421 .0000000000 N .7210155161 .0000000000 N .5375717557 .0000000000 W 385.6991853500 .0000000000 W 636.0664787886 .0000000000 W 474.2358050886 .0000000000 E 192494.5769628266 .0000000000 19.59 V -.8689798010 .0000000000 V .0996340298 .0000000000 V .5731134848 .0000000000 N -.8309940700 .0000000000 N .0952787255 .0000000000 N .5480609638 .0000000000 W -364.5920328433 .0000000000 W 41.8027823088 .0000000000 W 240.4573848757 .0000000000 E 11876.4548199713 .0000000000 1.21 V .2872248982 .0000000000 V -.5731591248 .0000000000 V .5351449518 .0000000000 N .3439413070 .0000000000 N -.6863370819 .0000000000 N .6408165005 .0000000000 W 37.4824307850 .0000000000 W -74.7964308085 .0000000000 W 69.8356366100 .0000000000
In general, the solution to the eigen system results in complex
numbers (with both real and imaginary parts). However, in the example
above, since the input matrix is symmetric (i.e., inverting the rows and columns
gives the same matrix) the eigen system has only real values (i.e., the
imaginary part is zero).
This fact makes it possible to use eigen vectors to perform principle component
transformation of data sets. The covariance or correlation
matrix of any data set is symmetric
and thus has only real eigen values and vectors.
Note The bold and red colored eigen vectors of the first principal component, ease of the comparison with the results derived from R's princomp() function that follows.
Using the W vector, new maps can be created:
r.mapcalc 'pc.1 = 385.6992*map.1 +636.0665*map.2 + 474.2358*map.3' r.mapcalc 'pc.2 = -364.5920*map.1 + 41.8027*map.2 + 240.4573*map.3' r.mapcalc 'pc.3 = 37.4824*map.1 - 74.7964*map.2 + 69.8356*map.3'
Using R's princomp() function
Command
princomp(modis)
Output
Call: princomp(x = modis) Standard deviations: Comp.1 Comp.2 Comp.3 857.5737 436.0922 108.5083 3 variables and 350596 observations.
Get loadings
(princomp(modis))$loadings
Loadings:
Comp.1 Comp.2 Comp.3
b02 -0.418 0.839 0.348
b06 -0.725 -0.684
b07 -0.547 -0.539 0.641
Comp.1 Comp.2 Comp.3 SS loadings 1.000 1.000 1.000 Proportion Var 0.333 0.333 0.333 Cumulative Var 0.333 0.667 1.000
The bold and red colored loadings, that is, the eigen vectors of the first principal component, ease of the comparison with the results derived from GRASS' m.eigensystem module above. Note the missing eigen value in row 2, column 2. For some reason R refused to yield it.
Based on the correlation matrix
Using m.eigensystem
Command in one line
(echo 3; r.covar -r MOD07_b02,MOD07_b06,MOD07_b07)|m.eigensystem
Output
r.covar: complete ... 100% E 2.2915877718 .0000000000 76.39 V -.5755655569 .0000000000 V -.7660355041 .0000000000 V -.6809380186 .0000000000 N -.4896413269 .0000000000 N -.6516766616 .0000000000 N -.5792830912 .0000000000 W -.7412186091 .0000000000 W -.9865075560 .0000000000 W -.8769182329 .0000000000 E .6740687010 .0000000000 22.47 V .8667178982 .0000000000 V -.1116525720 .0000000000 V -.6069908335 .0000000000 N .8145815825 .0000000000 N -.1049362531 .0000000000 N -.5704780699 .0000000000 W .6687852213 .0000000000 W -.0861544341 .0000000000 W -.4683721194 .0000000000 E .0343435272 .0000000000 1.14 V .2486404469 .0000000000 V -.6006166822 .0000000000 V .4655120098 .0000000000 N .3109794470 .0000000000 N -.7512029762 .0000000000 N .5822249325 .0000000000 W .0576307320 .0000000000 W -.1392129859 .0000000000 W .1078979635 .0000000000
The bold and red colored eigen vectors of the second principal component, ease of the comparison with the results derived from R's princomp() function that follows.
Using R's princomp() function
Command
princomp(mod07, cor=TRUE)
Output
Call: princomp(x = mod07, cor = TRUE)
Standard deviations: Comp.1 Comp.2 Comp.3 1.5030740 0.8397807 0.1885121 3 variables and 350596 observations.
Get loadings
(princomp(mod07, cor=TRUE))$loadings
Output
Loadings:
Comp.1 Comp.2 Comp.3
MOD2007_242_500_sur_refl_b02 -0.481 0.820 0.310
MOD2007_242_500_sur_refl_b06 -0.656 -0.102 -0.748
MOD2007_242_500_sur_refl_b07 -0.582 -0.563 0.587
Comp.1 Comp.2 Comp.3
SS loadings 1.000 1.000 1.000
Proportion Var 0.333 0.333 0.333
Cumulative Var 0.333 0.667 1.000
The bold and red colored loadings, that is, the eigen vectors of the second component, ease of the comparison with the results derived from GRASS' m.eigensystem module above.
Comments
Add comments here...
SVD solution
Using i.pca
Command
i.pca input=b2,b6,b7 output=pca.b267
Output
Eigen values, (vectors), and [percent importance]:
PC1 6307563.04 ( -0.64, -0.65, -0.42 ) [ 98.71% ]
PC2 78023.63 ( -0.71, 0.28, 0.64 ) [ 1.22% ]
PC3 4504.60 ( -0.30, 0.71, -0.64 ) [ 0.07% ]
Using R's prcomp() function
The following example replicates i.pca's solution, that is, using the same data without data centering and/or scaling (options center=FALSE and scale=FALSE).
Command
prcomp(mod07, center=FALSE, scale=FALSE) <<== this corresponds to i.pca
Output
Standard deviations:
[1] 4288.3788 476.8904 114.3971
Rotation:
PC1 PC2 PC3
MOD2007_242_500_sur_refl_b02 -0.6353238 0.7124070 -0.2980602
MOD2007_242_500_sur_refl_b06 -0.6485551 -0.2826985 0.7067234
MOD2007_242_500_sur_refl_b07 -0.4192135 -0.6423066 -0.6416403
- The eigenvector matrices match although prcomp() reports loadings (=eigenvectors) column-wise and i.pca row-wise.
- The eigenvalues do not match. To exemplify, the standard deviation for PC1 reported by prcomp() is 4288.3788 and the variance reported by i.pca is 6307563.04 [ sqrt(6307563.04) = 2511.486 ]
More examples to be added
References
Jon Shlens, "Tutorial on Principal Component Analysis, Dec 2005," [1] (accessed on March, 2009).
e-mails in GRASS-user mailing list
There are many posts concerning the functionality of i.pca. Most of them are questioning the non-reporting of eigenvalues (an issue recently fixed).
Old posts
Recent posts
Testing i.pca ~ prcomp(), m.eigensystem ~ princomp()
More sources to be added