GRASS and Python

From GRASS-Wiki
Jump to navigation Jump to search

Python SIGs

Python Special Interest Groups are focused collaborative efforts to develop, improve, or maintain specific Python resources. Each SIG has a charter, a coordinator, a mailing list, and a directory on the Python website. SIG membership is informal, defined by subscription to the SIG's mailing list. Anyone can join a SIG, and participate in the development discussions via the SIG's mailing list. Below is the list of currently active Python SIGs, with links to their resources.

See more at http://www.python.org/community/sigs/

Writing Python scripts in GRASS

Python is a programming language which is more powerful than shell scripting but easier and more forgiving than C. The Python script can contain simple module description definitions which will be processed with g.parser, as shown in the example below. In this way with no extra coding a GUI can be built, inputs checked, and a skeleton help page can be generated automatically. In addition it adds links to the GRASS message translation system. The library for "scripting" is "grass.script", typically used as: 

import grass.script as grass

The related files are at $GISBASE/etc/python/grass/script/*.py. See below for more details.

Note: For code which needs access to the power of C, you can access the GRASS C library functions via the Python "ctypes" interface.

Python script editor

The wxGUI Layer Manager in GRASS 6.4.3+ comes with a "Python shell" which enables users to type and execute python commands directly in wxGUI environment.

Embedded interactive Python Shell in wxGUI Layer Manager
Embedded interactive Python Shell in wxGUI Layer Manager


Using the GRASS Python Scripting Library

You can run Python scripts easily in a GRASS session.

To write these scripts,

  • check the code in lib/python/ which provides grass.script in order to support GRASS scripts written in Python.
 See the GRASS Python Scripting Library for notes and examples.
  • The scripts/ directory of GRASS contains a series of examples actually provided to the end users.

For the desired Python code style, have a look at SUBMITTING_PYTHON.

Creating Python scripts that call GRASS functionality from outside

Note: This is a more advanced use case of using GRASS' functionality from outside via Python. Commonly, a user will run GRASS Python script from inside a GRASS session, i.e. either from the command line or from the Python shell embedded in the wxGUI (screenshot).

For calling GRASS functionality from outside, see also Working with GRASS without starting it explicitly.

MS-Windows

In order to use GRASS functionality via Python from outside, some environment variables have to be set: 

GISBASE= C:\GRASS-64
GISRC= C:\Documents and Settings\user\.grassrc6
LD_LIBRARY_PATH= C:\GRASS-64\lib
PATH= C:\GRASS-64\etc;C:\GRASS-64\etc\python;C:\GRASS-64\lib;C:\GRASS-64\bin;C:\GRASS-64\extralib;C:\GRASS-64\msys\bin;C:\Python26;
PYTHONLIB= C:\Python26
PYTHONPATH= C:\GRASS-64\etc\python
GRASS_SH= C:\GRASS-64\msys\bin\sh.exe

Some hints:

  1. The Python interpreter (python.exe) needs to be in the PATH
  2. Python needs to be associated with the .py extension
  3. PATHEXT needs to include .py if you want to be able to omit the extension
  4. PYTHONPATH needs to be set to %GISBASE%\etc\python

1-3 should be taken care of by the Python installer. 4 needs to be done by the startup (currently, this doesn't appear to be the case on MS-Windows).

Linux

In order to use GRASS functionality via Python from outside, some environment variables have to be set: 

export GISBASE="/usr/local/grass-6.4.svn/"
export PATH="$PATH:$GISBASE/bin:$GISBASE/scripts"
export LD_LIBRARY_PATH="$LD_LIBRARY_PATH:$GISBASE/lib"
# for parallel session management, we use process ID (PID) as lock file number:
export GIS_LOCK=$$
# path to GRASS settings file
export GISRC="$HOME/.grassrc6"

Running external commands from Python

For information on running external commands from Python, see: http://docs.python.org/lib/module-subprocess.html

Avoid using the older os.* functions. Section 17.1.3 lists equivalents using the Popen() interface, which is more robust (particularly on Windows).

Testing and installing Python extensions

Debugging

Make sure the script is executable: 

   chmod +x /path/to/my.extension.py

During development, a Python script can be debugged using the Python Debugger (pdb): 

   python -m pdb /path/to/my.extension.py input=my_input_layer output=my_output_layer option=value -f

Installation

Once you're happy with your script, you can put it in the scripts/ folder of your GRASS install. To do so, first create a directory named after your extension, then create a Makefile for it, and a HTML man page: 

   cd /path/to/grass_src/
   cd scripts
   ls # It is useful to check out the existing scripts and their structure
   mkdir my.extension
   cd my.extension
   cp path/to/my.extension.py .
   touch my.extension.html
   touch Makefile

Next step is to edit the Makefile. It is a very simple text file, the only thing to check is to put the right extension name (WITHOUT the .py file extension) after PGM: 

   MODULE_TOPDIR = ../..
   
   PGM = my.extension
   
   include $(MODULE_TOPDIR)/include/Make/Script.make
   
   default: script

The HTML file would be generated automatically. If you want to add more precisions in it, you can do it (just make sure you start at DESCRIPTION. See existing scripts.)

You can then run "make" within the my.extension folder. Running "make" in the extension directory places the resulting files in the staging directory (path/to/grass_src/dist.<YOUR_ARCH>/). If you're running GRASS from the staging directory (/path/to/grass_src/bin.<YOUR_ARCH>/grass7), subsequent commands will used the updated files. 

   # in your extension directory (/path/to/grass_src/scripts/my.extension/)
   make
   # Starting GRASS from the staging directory
   /path/to/grass_src/bin.<YOUR_ARCH>/grass7
   my.extension help

You can also run "make install" from the top level directory of your GRASS install (say /usr/local/src/grass_trunk/). Running "make install" from the top level just copies the whole of the dist.<YOUR_ARCH>/ directory to the installation directory (e.g. /usr/local/grass70) and the bin.<YOUR_ARCH>/grass70 bin file to the bin directory (e.g. /usr/local/bin), and fixes any embedded paths in scripts and configuration files. 

   cd /path/to/grass_src
   make install
   # Starting GRASS as usual would work and show your extension available
   grass7
   my.extension help

Python extensions in GRASS GIS

wxPython GUI development

Python Ctypes Interface

This interface allows calling GRASS library functions from Python scripts. See Python Ctypes Examples for details.

Examples:


  • Latest and greatest: GRASS 7 Python scripts

Sample script for GRASS 6 raster access (use within GRASS, Spearfish session): 

#!/usr/bin/env python

## TODO: update example to Ctypes

import os, sys
from grass.lib import grass

if "GISBASE" not in os.environ:
    print "You must be in GRASS GIS to run this program."
    sys.exit(1)

if len(sys.argv)==2:
  input = sys.argv[1]
else:
  input = raw_input("Raster Map Name? ")

# initialize
grass.G_gisinit('')

# find map in search path
mapset = grass.G_find_cell2(input, '')

# determine the inputmap type (CELL/FCELL/DCELL) */
data_type = grass.G_raster_map_type(input, mapset)

infd = grass.G_open_cell_old(input, mapset)
inrast = grass.G_allocate_raster_buf(data_type)

rown = 0
while True:
    myrow = grass.G_get_raster_row(infd, inrast, rown, data_type)
    print rown, myrow[0:10]
    rown += 1
    if rown == 476:
        break

grass.G_close_cell(inrast)
grass.G_free(cell)

Sample script for vector access (use within GRASS, Spearfish session): 

#!/usr/bin/python

# run within GRASS Spearfish session
# run this before starting python to append module search path:
#   export PYTHONPATH=/usr/src/grass70/swig/python
#   check with "import sys; sys.path"
# or:
#   sys.path.append("/usr/src/grass70/swig/python")
# FIXME: install the grass bindings in $GISBASE/lib/ ?

import os, sys
from grass.lib import grass
from grass.lib import vector as grassvect

if "GISBASE" not in os.environ:
    print "You must be in GRASS GIS to run this program."
    sys.exit(1)

if len(sys.argv)==2:
  input = sys.argv[1]
else:
  input = raw_input("Vector Map Name? ")

# initialize
grass.G_gisinit('')

# find map in search path
mapset = grass.G_find_vector2(input,'')

# define map structure
map = grassvect.Map_info()

# define open level (level 2: topology)
grassvect.Vect_set_open_level (2)

# open existing map
grassvect.Vect_open_old(map, input, mapset)

# query
print 'Vect map: ', input
print 'Vect is 3D: ', grassvect.Vect_is_3d (map)
print 'Vect DB links: ', grassvect.Vect_get_num_dblinks(map)
print 'Map Scale:  1:', grassvect.Vect_get_scale(map)
print 'Number of areas:', grassvect.Vect_get_num_areas(map)

# close map
grassvect.Vect_close(map)

Python-GRASS add-ons

Stand-alone addons:

Using GRASS gui.tcl in Python

Here is some example code to use the grass automatically generated guis in python code. This could (should) all be bundled up and abstracted away so that the implementation can be replaced later. 

import Tkinter
import os

# Startup (once):

tk = Tkinter.Tk()
tk.eval ("wm withdraw .")
tk.eval ("source $env(GISBASE)/etc/gui.tcl")
# Here you could do various things to change what the gui does
# See gui.tcl and README.GUI

# Make a gui (per dialog)
# This sets up a window for the command.
# This can be different to integrate with tkinter:
tk.eval ('set path ".dialog$dlg"')
tk.eval ('toplevel .dialog$dlg')
# Load the code for this command:
fd = os.popen ("d.vect --tcltk")
gui = fd.read()
# Run it
tk.eval(gui)
dlg = tk.eval('set dlg') # This is used later to get and set 

# Get the current command in the gui we just made:
currentcommand = tk.eval ("dialog_get_command " + dlg)

# Set the command in the dialog we just made:
tk.eval ("dialog_set_command " + dlg + " {d.vect map=roads}")

FAQ

  • Q: Error message "execl() failed: Permission denied" - what to do?
A: Be sure that the execute bit of the script is set.

Links

General guides

Programming

  • Python and Statistics:
    • RPy - Python interface to the R-statistics programming language

Presentations

From FOSS4G2006:

Retrieved from "https://grasswiki.osgeo.org/w/index.php?title=GRASS_and_Python&oldid=16336"