Image processing/it
This page is in progress of translating to Italiano from English.
Contents
 1 Introduzione
 2 Screenshots
 3 Importing
 4 Preprocessing
 5 Image classification
 6 Image segmentation
 7 Edge detection
 8 Filtering
 9 Fourier Transform
 10 Canonical Component Analysis
 11 Principal Component Analysis
 12 Texture
 13 Spectral unmixing
 14 Thermal remote sensing
 15 Time series analysis
 16 Enhancements
 17 Vegetation indices
 18 Water indices
 19 Biomass indices
 20 Evapotranspiration
 21 Stereo anaglyphs
 22 Ideas collection for improving GRASS' Image processing capabilities
 22.1 libCTL  Library for affine, Helmert and projective transformations in 2D
 22.2 Spectral unmixing ideas for processing hyperspectral image data
 22.3 Spectral angle mapping ideas
 22.4 Geocoding ideas
 22.5 Image matching ideas
 22.6 Image classification ideas
 22.7 Stereo ideas
 22.8 Bundle block adjustment
 22.9 Lidar LAS format
 22.10 Improving the existing code
 23 Bibliography
Introduzione
Per una descrizione generale, vedi imageryintro  "Introduction: image processing] in GRASS GIS"
Introduzione generale
Numeri digitali e valori fisici (riflessione/radianzaalsensore):
Le immagini da satellite sono comunemente fornite come numeri digitali (Digital Numbers  DN) per minimizzare il volume di memoria, cioè il valore fisico analogico campionato in origine (colore, temperatura, etc) è memorizzato come una rappresentazione discreta in 816 bit. Per esempio, i dati Landsat vengono memorizzati come valori a 8bit (cioè in un intervallo da 0 a 255); i dati di altri satelliti possono essere memorizzati a 10 o 16 bit. I dati in forma di DN non sono ancora dati reali rilevati al suolo. Tali dati sono detti "al satellite"; per esempio, la quantità di energia rilevata dal sensore della piattaforma satellitare è codificata in 8 o più bit. Questa energia è detta radianza al sensore. Al fine di ottenere valori fisici dai DN, i fornitori di immagini satellitari usano un'equazione di trasformazione lineare (y = a * x + b) per codificare la radianza al sensore in valori da 8 a 16 bit. I DN si possono riconvertire in valori fisici applicando la formula inversa (x = (y  b) / a).
Il modulo di GRASS GIS i.landsat.toar trasforma facilmente i DN Landsat in radianceatsensor. Il modulo equivalente per i dati ASTER è i.aster.toar. Per altri satelliti si può usare r.mapcalc.
Riflessone/radianzaalsensore e riflettanza della superficie
Una volta ottenuta la radianzaalsensore, still the atmosphere influences the signal as recorded at the sensor. This atmospheric interaction with the sun energy reflected back into space by ground/vegetation/soil needs to be corrected. There are two ways to apply atmospheric correction for satellite imagery. The simple way for Landsat is with i.landsat.toar, using the DOS correction method. The more accurate way is using i.atcorr (which works for many satellite sensors). The atmospherically corrected sensor data represent surface reflectance, which ranges theoretically from 0 % to 100 %. Note that this level of data correction is the proper level of correction to calculate vegetation indices.
Image processing in GRASS GIS
Satellite imagery and orthophotos (aerial photographs) are handled in GRASS as raster maps and specialized tasks are performed using the imagery (i.*) modules. All general operations are handled by the raster modules.
 imageryintro: A short introduction to image processing in GRASS 6
 Full GRASS 4.0 Image Processing manual (PDF, 47 pages)
 imagery: Imagery module help pages
 Data import is generally handled by the r.in.gdal module
Screenshots
 The imagery screenshots page
Importing
The wxGUI offers a convenient tool for single map and bulk import:
 see Importing data
Satellite Data
Ocean Color
Sea Surface Temperature (SST)
High Resolution Data
Commercial satellite imagery
See also,
 Spectral Response specifications for IKONOS, GeoEye, QuickBird, WorldView
 various Whitepapers on High Resolution Satellite Imagery
Orthophotos
The wxGUI offers a convenient tool for single map and bulk import:
 see Importing data
Preprocessing
See also NASA LaRC Satellite Overpass Predictor
Geometric preprocessing/Georectification
 Georectification tool is available from the File menu in the GUI.
 i.points, i.vpoints (scanned maps, satellite images)
 i.ortho.photo (aerial images)
A multiband image may be grouped and georectified with a single set of ground control points (i.group, i.target, i.rectify).
See also the Georeferencing wiki page
Orthorectification
Radiometric preprocessing
 use r.mapcalc to apply gain/bias formula
 LANDSAT: you can also use i.landsat.toar
from GRASS AddOns(included since 6.4)
Correction for atmospheric effects
Visit the dedicated page on Atmospheric correction
Related Modules
 i.landsat.dehaze: simple darkobject/Tasseled Cap based haze minimization (from GRASS AddOns)
 i.atcorr: more complex correction but based on atmospheric models
Correction for topographic/terrain effects
In rugged terrain, such correction might be useful to minimize negative effects.
 simple "cosine correction" using r.sunmask, r.mapcalc (tends to overshoot when slopes are high)
 In i.topo.corr the following correction methods are implemented: cosine, minnaert, percent, cfactor.
 Note, that for the sun's zenith (in degrees) parameter, the equation "Sun's Zenith = 90  Sun's Elevation" is generally valid
Examples:
 Topographic correction of Landsat imagery using GRASS GIS (Blog article)
Cloud removal
 with i.landsat.acca
Image classification
See the dedicated Image classification page.
Image segmentation
 i.smap: Performs contextual image classification using sequential maximum a posteriori (SMAP) estimation
 i.segment: Image Segmentation
 r.smooth.seg: Performs image segmentation and discontinuity detection (based on the MumfordShah variational model) (addon)
 i.superpixels.slic: : Perform image segmentation using the SLIC segmentation method (addon)
Edge detection
Filtering
Fourier Transform
 i.fft, i.ifft
 see also Image destriping
 see also Fourier transforms for multitemporal analysis
Canonical Component Analysis
Principal Component Analysis
 i.pca
 see also Principal Components Analysis
Texture
A series of commonly used texture measures (derived from the Grey Level Cooccurrence Matrix, GLCM), also called Haralick's texture features are available:
 r.texture: In case of panchromatic maps or limited amount of channels, it is often recommended to generate synthetic channels through texture analysis
See here and here for the formulas to calculate texture. See also canopy texture mapping.
Spectral unmixing
 i.spec.unmix is used to perform "Spectral Unmixing"
 i.spec.sam is used to perform "Spectral Angle Mapping"
Thermal remote sensing
 r.mapcalc can be used to convert from DN (digital number) of arbitrary sensors to Kelvin/Celsius/...
 i.landsat.toar  Calculates topofatmosphere radiance or reflectance and temperature for Landsat MSS/TM/ETM+/OLI
 i.landsat8.swlst (src) Practical splitwindow algorithm estimating Land Surface Temperature from Landsat 8 OLI/TIRS imagery
 i.aster.toar  Calculates topofatmosphere radiance or reflectance and temperature for ASTER
 MODIS
Time series analysis
 r.series Makes each output cell value a function of the values assigned to the corresponding cells in the input raster map layers.
 see also Time series
 see also Time series development
 see also MODIS
Enhancements
Radiometric Enhancements
 i.landsat.rgb (GRASS 6.x)  i.colors.enhance (GRASS 7.x)
 Decorrelation stretching with r.colors or r.mapcalc
 Density slicing with r.colors
 Principal Component Analysis with i.pca
Geometric Enhancements  Image Fusion  Pansharpening  Image Segmentation
Image fusion and Pansharpening:
 i.pansharpen: Image fusion algorithms to sharpen multispectral with highres panchromatic channels
 i.rgb.his and i.his.rgb: can be used for image fusion
Segmentation:
 r.smooth.seg which performs image segmentation and discontinuity detection (based on the MumfordShah variational model). The module generates a piecewise smooth approximation of the input raster map and a raster map of the discontinuities of the output approximation. The discontinuities of the output approximation are preserved from being smoothed. (Addons)
 i.segment: Identifies segments (objects) from imagery data (GRASS 7)
Optimal channel selection for color composites
Vegetation indices
Water indices
 i.wi: Calculates different types of water indices (addon)
Biomass indices
Evapotranspiration
 i.eb.* and i.evapo.* are modules dedicated to evapotranspiration, see topic_evapotranspiration.
Please look at Image_processing/Evapotranspiration for some background information.
Stereo anaglyphs
 see Stereo anaglyphs
Ideas collection for improving GRASS' Image processing capabilities
Below modules need some tuning before being added to GRASS 6. Volunteers welcome.
libCTL  Library for affine, Helmert and projective transformations in 2D
To be evaluated: plain C translation https://svn.code.sf.net/p/gvsigce/code/trunk/libraries/libCTL/
 requires GNU Scientific Library for the matrix algebra
 It is a small library that provides a handful of transformation methods from source to target (2D) coordinates. Currently, this includes affine, Helmert and projective transformations in 2D.
 The main library is written in plain C and the transformation functions are a plain C conversion of the methods found in the QGIS (www.qgis.org) Georeferencer Plugin (projective and Helmert transformations) and Olivier Dalang's "worldfile transform" (https://gist.github.com/olivierdalang/ba97fc986ade4545068d).
 author: B Ducke
Spectral unmixing ideas for processing hyperspectral image data
 Make use of the Spectral Python (SPy) which is a pure Python module for processing hyperspectral image data
Spectral angle mapping ideas
Geocoding ideas
 i.homography: geocoding with lines (instead of points) with homography (as improved i.points; it was formerly called i.linespoints)
 support splines from GDAL (see GRASS_AddOns#Imagery_addons)
 New Georectifier: see also http://gama.fsv.cvut.cz/~landa/grass/swf/georect.html
Image matching ideas
 i.points.auto: automated search of GCPs based on FFT correlation (as improved i.points)
 Reference: M. Neteler, D. Grasso, I. Michelazzi, L. Miori, S. Merler, and C. Furlanello, 2005: An integrated toolbox for image registration, fusion and classification. International Journal of Geoinformatics, 1(1), pp. 5161 PDF
Image classification ideas
 pr: C code for classification problems
 GRASS implementation: i.pr.* source code is available here)
Stereo ideas
This is standalone stereo modeling software (DEM extraction etc). Waits for integration into GRASS.
Bundle block adjustment
Needed to orthorectify a series aerial images taken sequentially with overlap. "Historical" method which is nowadays interesting for UAV flights with octocopters and such.
Automatec GPC search could be done by "autosift".
Available: Octave code which prepares input to an i.ortho.photo batch job (contact Markus Neteler).
Lidar LAS format
LAS Tools by M. Isenburg, Howard Butler et al.: http://www.liblas.org
las2txt  r.in.xyz in= fs=" "
Update: r.in.lidar and v.in.lidar implemented by Markus Metz (GRASS 7), but las2txt is still useful for added control such as filtering or importing secondary data streams such as intensity.
(see LIDAR)
Improving the existing code
It might be sensible to merge the various image libraries:
 GRASS 6 standard libs:
 lib/imagery/: standard lib, in use (i.* except for i.points3, i.rectify3, see below)
 imagery/i.ortho.photo/libes/: standard lib, in use (i.ortho.photo, photo.*)
 GRASS 5 (! only) image3 lib:
 libes/image3/: never finished improvement which integrated the standard lib and the ortho lib. Seems to provide also ortho rectification for satellite data (i.points3, i.rectify3)
 GRASS 5/6 image proc commands:
 merge of i.points, i.vpoints, i.points3 (see above)
 merge of i.rectify and i.rectify3 (see above)

addition of new resampling algorithms such as bilinear, cubic convolution (take from r.proj or r.resamp.aggreg)(done 10/2010)  add other warping methods (maybe lanczos or thin splines from GDAL?): Addons#i.warp
 implement/finish linewise orthorectification of satellite data
Bibliography
 Search for "GRASS GIS Image processing"  Google Scholar
 Search for "GRASS GIS Remote Sensing"  Google Scholar